Ara
Toplam kayıt 19, listelenen: 11-19
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
(Sage Publications Ltd, 2020)
In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...
Thermoforming behavior of 3D-printed PLA sheets
(Carl Hanser Verlag, 2020)
Fused deposition modeling is one of the most well-known additive manufacturing methods. It might be considered the easiest way to produce particle reinforced composites or unreinforced sheets which are biodegradable and ...
Bending and compression performance of composite tube reinforced foam core sandwich structures
(Applied Mechanics Laboratory, 2020)
In some applications such as walls and roofs, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography
(DEStech Publications Inc., 2018)
Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave ...
Design of a real-sized composite drive shaft and critical points from beginning to end
(Applied Mechanics Laboratory, 2020)
In this study, the replacement of a metal drive shaft by a composite counterapart was investigated. The drive shaft considered here is a thin walled tube with an internal diameter of 60 mm and a length of 1200 mm. These ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)
The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ...
An Experimental and Numerical Investigation of Particle Morphology Effect on the Elasto-plastic Behavior of Particle-filled Composites
(Korean Fiber Soc, 2022)
In this study, the influence of particle shapes on the elastoplastic response of composite materials is investigated both experimentally and computationally. Flake, spherical, irregular, and rod type glass particles are ...