Ara
Toplam kayıt 19, listelenen: 1-10
A Review on the Mechanical Modeling of Composite Manufacturing Processes
(Springer, 2017)
The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
(Aalborg Univ Press, 2015)
The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ...
Effect of particle shape on the wear and friction behavior of particle-reinforced epoxy coatings
(Springer, 2019)
Epoxy coatings are increasingly becoming popular choices as barriers against acids and alkali for protection of concrete and metal products. In applications, metal containers are often coated with epoxy-based coatings to ...
A composite sandwich plate with a novel core design
(Elsevier Sci Ltd, 2018)
In this study, a new core design is introduced for sandwich composite structures. Its strength and failure behavior are investigated via three-point bending tests. E-glass-fiber-reinforced epoxy resin is selected as the ...
Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials
(Asme, 2018)
Micro-computed tomography (CT) was used as a tool to investigate the deformation behavior of particulate-filled composite materials. Three different shapes of glass fillers (spherical, flake, and fiber) and filler mass ...
Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements
(Springer Heidelberg, 2019)
A method based on X-ray micro-CT was introduced to create realistic representative volume elements (RVE) for particulate-filled composite materials. The method is applicable to most composite systems, and can be utilized ...
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
(Carl Hanser Verlag, 2019)
Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ...
Effect of residual stress on the bending response of L-shaped composite laminates
(Elsevier Sci Ltd, 2020)
[No Abstract Available]
Influences of out-of-plane fiber waviness on the curved beam strength of glass fiber composite laminates
(Pamukkale Univ, 2020)
In-plane and out-of-plane waviness are inevitable defects in parts that have curved sections made of continuous fiber-reinforced composites. These defects can be located in the micro, meso (ply level) and macroscale (part ...