Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 880-899
-
Spinnable carbon nanotubes and technical yarns produced by these special fibers
(Chamber of Textile Engineers, 2015)Carbon nanotubes are highly special materials having low density but high strength and modulus, high electrical and thermal conductivity and stability at relatively low and high temperatures. While these materials are ... -
Stabilization and solidification of electric arc furnace dust originating from steel industry by using low grade MgO
(Polska Akad Nauk, Polish Acad Sciences, Inst Environ Eng Pas, 2015)In this study, solidification/stabilization (S/S) of electric arc furnace dust (EAFD) which is generated during the production of steel from scrap metals and classified as hazardous waste were investigated by using different ... -
Statistical analysis of circular knitting fabric defects with control charts
(Chamber of Textile Engineers, 2018)One of the main objectives of all sectors of production nowadays is to increase the production quality. Quality control practices are an activity performed by fabric producers at the end of each production process. In this ... -
Status of hormones and painkillers in wastewater effluents across several European states-considerations for the EU watch list concerning estradiols and diclofenac
(Springer Heidelberg, 2016)Present technologies for wastewater treatment do not sufficiently address the increasing pollution situation of receiving water bodies, especially with the growing use of personal care products and pharmaceuticals (PPCP) ... -
STM32F429 Discovery Board-Based Emulator for Lotka-Volterra Equations
(2021)Lotka-Volterra equations are commonly used in prey-predator population studies. Simulation programs are commonly used to produce solutions of Lotka-Volterra equations and to examine their initial value dependendence. In ... -
A study for determining the elemantary school students' environmental knowledge and environmental attitude level
(Elsevier Science Bv, 2012)With this study, it was aimed to reveal the relationship between knowledge and attitudes of students at 5th and 8th grades in elementary school by deliberating indirect indicators showing the levels and awareness on ... -
A study of selvedge waste length in rapier weaving by image analysis technique
(Ege Univ, 2017)One of the most important constraints of shutleless weaving machines is the necessity to form a false selvedge at both sides. The nature of selvedge formation in a rapier loom is analysed, and the variation in the length ... -
The sub-climate regions and the sub-precipitation regime regions in Turkey
(Elsevier, 2012)A matrix created from the correlation coefficients of the meteorological data was used as input for cluster analysis and this application yielded much better results in high cluster solutions as compared to classical ... -
Subrecent charophyte flora from Çesşmealti (Izmir Gulf, Western Turkey): Palaeoecological implications
(Elsevier, 2023)A charophyte assemblage from lower Holocene sediments in ces,mealti (Izmir Gulf, Turkey) is described and illustrated for the first time here. This assemblage is composed of well-preserved gyrogonites and oospores of ... -
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ... -
Sulphate Performance of Different Types of Fly Ash Concrete
(Yildiz Technical Univ, 2014)Fly ash is the waste product of the thermal power plants, where coal is burned for generating electricity. Using fly ash in concrete production is one of the important ways of reducing its negative effects. When fly ash ... -
Surface appearance evaluation of some weft knitted fabric reinforced composites
(Fiber Society, 2010)In this study, it was aimed to investigate the thermal effects of some weft knitted fabric reinforced polypropylene composites on the surface appearance. Polypropylene is the matrix phase and the aramid yarn and copper ... -
Sustainable technologies for recycling and reuse: an overview
(Springer Heidelberg, 2018)[No Abstract Available] -
Synaptic noise facilitates the emergence of self-organized criticality in the Caenorhabditis elegans neuronal network
(Taylor and Francis Ltd, 2018)Avalanches with power-law distributed size parameters have been observed in neuronal networks. This observation might be a manifestation of self-organized criticality (SOC). Yet, the physiological mechanisms of this behaviour ... -
Synchronization Cost of Coupled Oscillators with a Spatial Embedding
(Institute of Electrical and Electronics Engineers Inc., 2019)Synchronous behavior brings advantages for complex systems. Yet, this advantage comes with a cost: Emergence and sustainability of synchronization requires a continuous exchange among the interacting units. Thus, networks ... -
Synthesis and characterization of Fe3O4@Cs@Ag nanocomposite and its use in the production of magnetic and antibacterial nanofibrous membranes
(Elsevier B.V., 2020)Electrospinning is a promising technique to produce polymeric as well as metal oxide nanofibers in diverse domains. In this work, different weight ratios (5%, 7.5% and 10%) of Fe3O4@Cs@Ag magnetic nanoparticles were added ... -
Synthesis and Magnetic Characterization of Cu Substituted Barium Hexaferrites
(Springer, 2018)Cu2+ ion substituted nanocrystalline BaFe12O19 [Ba1 - xCuxFe12O19 (0.0 x 0.5)] hexaferrite powders were synthesized by sol-gel combustion route and its effects on structure, morphology and magnetic properties of barium ... -
Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying
(Consejo Superior Investigaciones Cientificas-Csic, 2020)The Fe-based Ti+Ni3Al+Al2O3 powder mixture is mechanically alloyed in a Spex ball mill. Composites with Fe-based Ti+Ni3Al+Al2O3 addition were produced at 1000 degrees C sintering temperature for 1 h sintering time. The ... -
Synthesis and Structural Investigations of Copper Abietat Complexes Obtained from Abietic Acid Existing in Sunflower Oil
(Asian Journal Of Chemistry, 2012)The purpose of this study is to remove copper from wastewater by preparing copper abietat using abietic acid which exists in sunflower oil. For this, initially the abietic acid present in sunflower oil was obtained. Then ...
