Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme

Periodic Structures of Great Lakes Levels Using Wavelet Analysis

Cengiz, Taner Mustafa (Sciendo, 2011)

The recently advanced approach of wavelet transforms is applied to the analysis of lake levels. The aim of this study is to investigate the variability of lake levels in four lakes in the Great Lakes region where the method ...

Periyodik yığılı kütleli kirişlerde eğilme dalgalarının yayılımı

Özmutlu, Aydın (2022)

Bu çalışmada, periyodik yığılı kütleli Euler-Bernoulli kirişinde dispersiyon analizi yapılmakta ve periyodikliğin etkileri araştırılmaktadır. Önce sonsuz uzunlukta periyodik yığılı kütleli bir kiriş için yayılma matrisi ...

Permeability properties of single jersey fabrics made of hollow yarns

Gürkan Ünal, Pelin; Üreyen, M.E. (Taylor and Francis Ltd., 2017)

In this work effect of using hollow yarns on the permeability properties of the single jersey knitted fabrics were studied. Firstly yarns were produced by ring spinning machine using cotton, viscose and acrylic fibres in ...

Photo(Catalytic) oxidation processes for the removal of natural organic matter and contaminants of emerging concern from water

Brienza, M.; Özkal, Can Burak; Li Puma, G. (Springer Verlag, 2019)

Natural organic matter (NOM) is a heterogeneous complex of organic materials and is ubiquitous in natural aquatic systems. The amount of NOM in the environment is continuously increasing because of global warming and/or ...

Photocatalytic activity based-optimization of TTIP thin films for E-coli inactivation: Effect of Mn and Cu dopants

Özkal, Can Burak; Mantzavinos, Dionissios; Meriç, Süreyya (Elsevier, 2017)

Advanced oxidation processes (AOPs) are defined amongst the most effective treatment options for removal of micropollutants and bacteria inactivation. Among AOPs, photocatalysis process took particular attention of being ...

Photocatalytic bacteria inactivation by TiO2-Ag based photocatalysts and the effect on antibiotic resistance profile

Özkal, Can Burak; Meriç, Süreyya (Bentham Science Publishers, 2020)

Background: In the last decade, research in the field of contaminants of emerging concern proliferated while special interest was focused on antibiotic-resistant bacteria, antibiotic resistance genes as widespread pollutants. ...

Photocatalytic Decolorization of Two Remazol Dyes Using TiO2 Impregnated Pumice Composite as Catalyst

Çifçi, Deniz İzlen; Terzi, Sema; Meriç, Süreyya (Elsevier Science Bv, 2019)

[No Abstract Available]

Photocatalytic degradation of methylene blue by waste ZnO catalyst

Çifçi, Deniz İzlen (Pamukkale Univ, 2017)

The purpose of this study, the usability of the ZnO content of waste which produces from metal waste recycling industries as a catalyst was investigated for the removal of methylene blue by the photocatalytic oxidation ...

Physical Characterisation of Natural Organic Matter and Determination of Disinfection By-Product Formation Potentials in Istanbul Surface Waters

Avşar, Edip; Toroz, İsmail; Hanedar, Asude (Parlar Scientific Publications (P S P), 2015)

Natural organic matter (NOM) is a complex mixture of various organic molecules mainly originating from aquatic organisms, soil and terrestrial vegetation which enters surface and ground waters. Through the different reaction ...

Physicochemical aspects of sludge drying

Tunçal, Tolga; Jangam, Sachin V.; Mujumdar, A.S. (CRC Press, 2014)

Untreated municipal sludge could be regarded as hazardous waste material due to its high organic and metallic content. Decreasing sludge moisture content is the primary objective for all sustainable sludge management ...

Phytoremediation of metal: Lithium

Adiloğlu, Sevinç; Çifçi, Deniz İzlen; Meriç, Süreyya (Elsevier, 2022)

Phytoremediation is a cost-effective and applicable new technology that uses plants to achieve remediation of various contaminants from agricultural areas and healthy agricultural production. Rare earth elements have gained ...

Piezoelectric textile fibres for wearable energy harvesting systems

Matsouka, Dimitroula; Vassiliadis, Savvas; Vatansever Bayramol, Derman (Iop Publishing Ltd, 2018)

Piezoelectric textile fibres are important for wearable energy harvesting applications. Piezoelectric melt-spun fibres have been under investigation starting with 2010. While most of research has been carried out on fibres ...

Piroliz Uygulanmış Çeltik Sapları ile Sulu Çözeltilerden Renk Giderimi

Kaykıoğlu, Gül; Dalmış, İbrahim Savaş (2020)

Bu çalışmanın amacı, piroliz uygulanmış pirinç sapları ile (PPS) sulu çözeltilerden metilen mavisi (MB) giderim performansınıdeğerlendirmektir. pH (4, 5.9 (doğal pH), 7, 9 ve 11), başlangıç boya konsantrasyonu (5, 10, 15 ...

Planning experience of Hermann Jansen in gaziantep city during 1930s

Durukan Kopuz, Ayşe (Peter Lang AG, 2019)

The establishment of the Republican regime in 1923 in the history of Turkish architecture indicates an important starting/turning point in our history consciousness. In the mentioned period, a new nation-state were formed ...

Planning of waste electrical and electronic equipment (WEEE) recycling facilities: MILP modelling and case study investigation

Çapraz, Ozan; Polat, Olcay; Güngör, Aşkıner (Springer, 2015)

Waste electrical and electronic equipment (WEEE) consist of many different substances some of which contain hazardous components and valuable materials. The recovery of WEEE plays a key role on environmental sustainability ...