Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 611-630
-
Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials
(Asme, 2018)Micro-computed tomography (CT) was used as a tool to investigate the deformation behavior of particulate-filled composite materials. Three different shapes of glass fillers (spherical, flake, and fiber) and filler mass ... -
A Microcontroller Implementation of Hindmarsh-Rose Neuron Model-Based Biological Central Pattern Generator
(Institute of Electrical and Electronics Engineers Inc., 2019)Central Pattern Generator (CPG) has an important role in controlling the locomotion part of the animals. Bio-inspired Central Pattern Generators can find application areas in robotic and control applications. FPGA ... -
A microcontroller-based ECG signal generator design utilizing microcontroller PWM output and experimental ECG data
(Institute of Electrical and Electronics Engineers Inc., 2018)Signal generators are commonly used in biomedical engineering studies. Biomedical circuits must often be tested using EEG, ECG etc. signals. The circuit tests are usually done by connecting electronic circuits to humans. ... -
Microelements in the Lands of the Azerbaijan Republic
(Scibulcom Ltd, 2006)Microelements are necessary to support life. However, in larger or lower amounts, they may become more important and critical. They may be accumulated in biological systems and become a significant health hazard. The main ... -
Microhardness evaluation of enamel adjacent to an improved GIC sealant after different enamel pre-treatment procedures
(Ariesdue Srl, 2014)Aim This in vitro study was carried out to evaluate the microhardness of enamel adjacent to a glass ionomer cement (GIC) with high fluoride content used as a sealant (Fuji Triage, GC Corp., Japan) after laser, bur or air ... -
Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements
(Springer Heidelberg, 2019)A method based on X-ray micro-CT was introduced to create realistic representative volume elements (RVE) for particulate-filled composite materials. The method is applicable to most composite systems, and can be utilized ... -
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ... -
Microplastic Release from Domestic Washing
(2021)Plastics have been used by human beings in a wide variety of materials. Recently, microplastics, either primary or secondary, are encountered in different part of the environment on a global scale. One of the common type ... -
MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, 2014)The plasma transferred arc (PTA) process was used for developing wear resistance of AISI 430 steel substrate. Appropriate quantities of FeCrC, FeW and FeTi powders were combined to create conditions that synthesized M7C3 ... -
Microwave Drying Behaviour of Tomato Slices
(Sage Publications Ltd, 2013)In this study, microwave drying behaviour of apple slices was investigated experimentally to determine the effect of microwave power on drying, energy consumption and colour quality. Microwave drying behaviour was simulated ... -
Microwave energy assisted carbonization of nanostructured conducting polymers for their potential use in energy storage applications
(Walter De Gruyter Gmbh, 2017)Three well-established one-step approaches, namely, conducting polymer (CP) nanofiber (NF) synthesis by NF seeding, CP nanoclip (NC) synthesis by oxidative template, and microwave (MW) energy-assisted carbonization were ... -
Microwave Energy-Assisted Fabrication of Hierarchically Structured Carbon Nanotube/Carbon Fiber Composites
(2016)Zahmetsiz, sade ve basit buna rağmen oldukça verimli, hesaplı ve kısa süreli (30 s) mikrodalga enerjisi tabanlı bir ısıtma işlemi kullanılarak; yüzeyini çok duvarlı karbon nanotüplerin ormanımsı bir tabaka halinde kapladığı ... -
Microwave welding/reinforcing approach at the interface of thermoplastic materials
(Amer Chemical Soc, 2016)[No Abstract Available] -
Mikrodalga Enerjisi Yardımıyla Hiyerarşik Yapılı Karbon Nanotüp/Karbon Lifi Kompozitlerinin Üretilmesi
(2016)Zahmetsiz, sade ve basit buna rağmen oldukça verimli, hesaplı ve kısa süreli (30 s) mikrodalga enerjisi tabanlı bir ısıtma işlemi kullanılarak; yüzeyini çok duvarlı karbon nanotüplerin ormanımsı bir tabaka halinde kapladığı ... -
Minimum Spanning Tree Reflects the Alterations of the Default Mode Network During Alzheimer's Disease
(Springer, 2011)This study analyzes the connectivity pattern of the default mode network (DMN) in patients with Alzheimer's disease (AD) in comparison with young and elderly controls using the minimum spanning tree (MST). This tree is a ... -
Mobile Posturographic Analysis System
(IEEE, 2016)There is an increasing ratio of balance losses and consequently risk of falling with aging population. The failure of current treatment methods to achieve significant improvements has rendered the patient passive in his/her ... -
A model for predicting drying time period of wool yarn bobbins using computational intelligence techniques
(Sage Publications Ltd, 2015)In this study, a predictive model has been developed using computational intelligence techniques for the prediction of drying time in the wool yarn bobbin drying process. The bobbin drying process is influenced by various ... -
Model-based evaluation of microbial mass fractions: effect of absolute anaerobic reaction time on microbial mass fractions
(Taylor & Francis Ltd, 2010)Although enhanced biological phosphorus removal processes (EBPR) are popular methods for nutrient control, unstable treatment performances of full-scale systems are still not well understood. In this study, the interaction ... -
Modeling and Analysing the Tensile Behavior of Fabric Samples
(Budapest Tech, 2013)This paper presents a structural-mechanical model for describing the tensile behavior of textile fabrics in main directions based on the fiber-bundle-cells modeling theory and method. The applicability of this model, created ... -
Modeling and analysis of dielectric materials by using gradient-descent optimization method
(World Scientific Publ Co Pte Ltd, 2017)This study presents a numerical method based on parallel RC equivalent circuit model fitting methodology for analysis and modeling of dielectric materials. The proposed method employs gradient-descent optimization method ...