Yayın tarihi için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 41-60
-
Reuse of anaerobically and aerobically pre-treated textile wastewater by UF and NF membranes
(Elsevier, 2010)The aim of this study is to compare different pre-treatment techniques before the use of UF and NF membranes for textile industry effluents. Three different applications are discussed. First, raw textile wastewater effluent ... -
Evaluating Drying Potential of Different Sludge Types: Effect of Sludge Organic Content and Commonly Used Chemical Additives
(Taylor & Francis Inc, 2010)Drying of residual treatment sludge is one of prerequisites in final disposal of this hazardous material. In this study, sludge drying potential (SDP) of different sludge types (DST) and the effect of organic content and ... -
Developing pneumatic control for a manual electrical resistance spot welding machine
(2010)Bu çalışmada; tarım makineleri imalatında kullanılan, manüel kontrollü elektrik direnç nokta kaynak makinesi, yeniden revize edilerek otomasyona uygun hale getirilmiştir. Sistemin dönüştürülmesinde pnömatik devre elemanlarından ... -
Homogeneity analysis of Turkish meteorological data set
(Wiley, 2010)The missing value interpolation and homogeneity analysis were performed on the meteorological data of Turkey. The data set has the observations of six variables: the maximum air temperature, the minimum air temperature, ... -
Laboratory and Field Observations for Golden Horn Marine Clay
(Taylor & Francis Inc, 2010)Istanbul, the largest city in Turkey and one of the major metropolitan areas in the world, cleaned one of its environmentally polluted areasGolden Hornby dredging 5 million m3 of the bottom sediments and pumping the resulting ... -
Experimental analysis of the thermal behaviour of mezzanine floors in buildings with cavity wall insulation
(Academic Journals, 2010)In this study, the thermal behaviour of mezzanine beam-slab floor sections of buildings under temperate climate conditions was experimentally investigated. Data were obtained from measurements on buildings under service ... -
Drying Behavior of Cultured Mushrooms
(Wiley, 2010)In this study, the drying behavior of cultured mushrooms with an initial moisture content of 93% (drying basis [d.b.]) was investigated experimentally for different slice thicknesses and drying air temperatures, and the ... -
Determination of electromagnetic shielding performance of plain knitting and 1X1 rib structures with coaxial test fixture relating to ASTM D4935
(Taylor & Francis Ltd, 2010)In this study, electromagnetic shielding effectiveness of some weft-knitted structures is investigated. For this purpose, weft-knitted structures are produced using copper wire/cotton incorporated yarns. Conductive yarns ... -
Dyeing of polyamide fabrics with a natural dye: White onion skin
(Fiber Society, 2010)[No abstract available] -
Effect of warp tension in weaving process on colour obtained in reactive dyeing and fabric shrinkage of cotton
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2010)Effect of warp tension in Weaving process on colour obtained in reactive dyeing and fabric:Shrinkage,of cotton In dyehouses dye recipes related to the desired colour which exist previously are used for colour matching: It ... -
Surface appearance evaluation of some weft knitted fabric reinforced composites
(Fiber Society, 2010)In this study, it was aimed to investigate the thermal effects of some weft knitted fabric reinforced polypropylene composites on the surface appearance. Polypropylene is the matrix phase and the aramid yarn and copper ... -
Evaluation of fabric defects in a weaving mill
(Fiber Society, 2010)In today's global market, the quality of a textile material does matter just as much as its price, although the acceptable level of quality varies with end uses. The quality of woven fabrics is entirely dependent on the ... -
The use of dendrimers to obtain low temperature dyeability on mohair and Angora fibers
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2010)Dendrimers are macromolecules with a regular and highly branched three-dimensional architecture. In this study, the aim was to improve the dyeability of mohair and Angora fibers via dendrimer application and to assess the ... -
The effect of material and thickness of collector electrode on fiber fineness in electrospinning
(Fiber Society, 2010)[No abstract available] -
Effects of fixing agents on Fastness properties of Mohair Fibers Dyed with leveling acid dyes
(Fiber Society, 2010)[No abstract available] -
The thermal properties of alpaca and alpaca/wool blended fabrics
(Fiber Society, 2010)[No abstract available] -
On Temporal Connectivity of PFC Via Gauss-Markov Modeling of fNIRS Signals
(IEEE-Inst Electrical Electronics Engineers Inc, 2010)Functional near-infrared spectroscopy (fNIRS) is an optical imaging method, which monitors the brain activation by measuring the successive changes in the concentration of oxy- and deoxyhemoglobin in real time. In this ... -
Emulator circuit of Ti02 memristor with linear dopant drift made using analog multiplier
(2010)Memristors or charge-controlled memristive systems , are not available for experimental studies in market. In literature, emulators which mimicks memristor behaviour for studying and teaching of memristor do exist. In this ... -
Performance analysis for resource management in integrated cellular/WLAN networks
(2010)To utilize the total resources in cellular/WLAN integration for both cellular and WLAN network, their different channel allocation strategies should be considered and efficient resource management techniques are required. ... -
On the algebraic expression of the AES S-box like S-boxes
(2010)In the literature, there are several proposed block ciphers like AES, Square, Shark and Hierocrypt which use S-boxes that are based on inversion mapping over a finite field. Because of the simple algebraic structure of ...