Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 395-414
-
Examination of a Memristor-Based Low-Pass Filter Topology
(IEEE, 2017)In this work, a memristor based low-pass filter topology in which a memristor is placed as the input element and a capacitor is placed as the negative feedback element to an inverting op-amp is examined. The memristor ... -
Examination of lean manufacturing systems by simulation technique in apparel industry
(Taylor and Francis Ltd., 2021)In this study, production time of three different products is determined by examining their production process and simulation models of these products are created by implementing statistical distribution of production times ... -
Examination of parameters used in ant colony algorithm over truss optimization
(2022)Metaheuristic optimization techniques have been used to solve engineering problems with an increasing speed for the last 30 years. Most of these algorithms have been developed by imitating a process in nature. In this ... -
Examination of Soil Improvement with Reused Tires and Pets
(Springer International Publishing Ag, 2019)Various studies have been executed for the aim of obtaining new products via reused waste materials or to use such materials as admixture materials in already available products. The widespread, worldwide popularity of ... -
Examining the Impact of Feature Selection on Classification of User Reviews in Web Pages
(IEEE, 2018)The user reviews in web pages can provide useful information about the content of the web page for text processing applications. Automatically extracting data from a web page is a crucial process for these applications. ... -
Existence of SARS-CoV-2 RNA on ambient particulate matter samples: A nationwide study in Turkey
(Elsevier, 2021)Coronavirus disease 2019 (COVID-19) is caused by the SARS-CoV-2 virus and has been affecting the world since the end of 2019. The disease led to significant mortality and morbidity in Turkey, since the first case was ... -
Experimental analysis of the thermal behaviour of mezzanine floors in buildings with cavity wall insulation
(Academic Journals, 2010)In this study, the thermal behaviour of mezzanine beam-slab floor sections of buildings under temperate climate conditions was experimentally investigated. Data were obtained from measurements on buildings under service ... -
Experimental and numerical investigation of ground heat exchangers in the building foundation
(Pergamon-Elsevier Science Ltd, 2019)The current study proposes a novel method with the experimental and numerical studies for the ground source heat pumps, which are known as environment-friendly and efficient heating & cooling systems to overcome their ... -
Experimental and numerical investigation of heat transfer in a channel with multiple phase change materials (PCMs)
(Elsevier Ltd, 2022)In this study, the thermal performance of an air-phase change material (PCM) unit used in free cooling applications was examined experimentally and numerically by Comsol finite element simulation software. Effects of the ... -
An Experimental and Numerical Investigation of Particle Morphology Effect on the Elasto-plastic Behavior of Particle-filled Composites
(Korean Fiber Soc, 2022)In this study, the influence of particle shapes on the elastoplastic response of composite materials is investigated both experimentally and computationally. Flake, spherical, irregular, and rod type glass particles are ... -
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ... -
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
(Carl Hanser Verlag, 2019)Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ... -
An experimental comparison of radiant wall and ceiling cooling system integrated with ground source heat pump and direct expansion fan coil system in a highly glazed office room
(Elsevier Ltd, 2022)Hydronic radiant systems, which provide a thermal comfort environment, come to the fore in different building applications due to their energy saving potential and being integrated with renewable energy systems. The aim ... -
Experimental investigation and pseudoelastic truss model for in-plane behavior of corrugated sandwich panels with polyurethane foam core
(Elsevier Science Inc, 2021)Sandwich panels are commonly used in facades and the roofs of industrial buildings due to their well-known advantages. However, there is limited data about the in-plane behavior of the panels. Hence, this paper aimed to ... -
Experimental investigation of thermal comfort performance of a radiant wall and ceiling panel system
(Yildiz Technical University, 2022)The number of radiant heating-cooling systems in building applications is increasing it is because of low energy consumption, low operating temperature and high values they provide in terms of working compatibility with ... -
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ... -
An experimental study on production of intelligent textile by using ionocromic materials
(2019)The production of an intelligent textile material that changes color under the influence of pHwas researched in this research article. For this purpose, halochromic dyes were used. Inhalochromic dyes, bleeding and fastness ... -
Experimentally investigating the usability of waste interlocking concrete paver in the plant-mix base layer
(Gazi Univ, Fac Engineering Architecture, 2022)Due to the growth in the construction industry in recent years, the need for natural aggregates has increased. Due to this increase in need, the search for alternative materials to natural aggregate has begun. Construction ... -
Experımental analysıs of the thermal behavıour of mezzanıne floors ın buıldıngs wıth cavıty wall ınsulatıon
(Academic Journals, 2010)In this study, the thermal behaviour of mezzanine beam-slab floor sections of buildings under temperate climate conditions was experimentally investigated. Data were obtained from measurements on buildings under service ... -
EXPLORING THE EFFECT OF COVID-19 ON MUNICIPAL WASTE GENERATION WITH SYSTEM DYNAMICS MODELLING
(Gh Asachi Technical Univ Iasi, 2022)This study examines the dynamic change in population and municipal waste generation during the COVID-19 pandemic. A stockflow infection modelling was used to link population dynamics with disease transmission parameters ...