Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 141-160
-
Comparative performance analysis of building foundation Ground heat exchanger
(Pergamon-Elsevier Science Ltd, 2020)The aim of this work is to improve the performance of Ground-Source Heat Pumps (GSHPs) by placing the heat exchanger pipes in the soil under the building foundation and in the building foundation reconstructed in Turkey. ... -
Comparative proteogenomic analysis of right-sided colon cancer, left-sided colon cancer and rectal cancer reveals distinct mutational profiles
(Bmc, 2018)Right-sided colon cancer (RCC) has worse prognosis compared to left-sided colon cancer (LCC) and rectal cancer. The reason for this difference in outcomes is not well understood. We performed comparative somatic and proteomic ... -
Comparing alkaline and thermal disintegration characteristics for mechanically dewatered sludge
(Taylor & Francis Ltd, 2011)Thermal drying is one of the advanced technologies ultimately providing an alternative method of sludge disposal. In this study, the drying kinetics of mechanically dewatered sludge (MDS) after alkaline and thermal ... -
Comparison and Seasonal Evaluation of the Rural and Urban Ambient Pm2.5 and Pm10 Mass Concentrations Based on Meteorological Parameters
(Stef92 Technology Ltd, 2013)Epidemiological studies have shown a significant impact of fine particles below 10 w square m (PM10) on human health. Due to the increasing interest for the fine particles (PM2.5) the measurement program of the network has ... -
Comparison of Acid Red 114 Dye Adsorption by Fe3O4 and Fe3O4 Impregnated Rice Husk Ash
(Hindawi Ltd, 2016)The removal of Acid Red 114 (AR114) dye by adsorption process, using the magnetic nanoparticle (RHA-MNP) which is produced from rice husk ash burned at 300 degrees C and the magnetic nanoparticle (MNP, Fe3O4), was studied. ... -
Comparison of ANN and RSM modeling approaches for WEDM process optimization
(Walter De Gruyter Gmbh, 2021)In this paper, an effective process optimization approach based on artificial neural networks with a back propagation algorithm and response surface methodology including central composite design is presented for the ... -
Comparison of artificial intelligence methods for predicting compressive strength of concrete
(Croatian Soc Civil Engineers-Hsgi, 2021)Compressive strength of concrete is an important parameter in concrete design. Accurate prediction of compressive strength of concrete can lower costs and save time. Therefore, thecompressive strength of concrete prediction ... -
Comparison of Conventional and Ultrasonic-Assisted Adsorption Processes by Using H3PO4 Activated Cypress Tree Cone for Methylene Blue Removal
(Pleiades Publishing Inc, 2022)Recycling agricultural waste, such as corn cobs, tree cones or grape stalks, contributes to converting waste into a new resource by encouraging the development of the circular economy. In this study, colour removal efficiency ... -
Comparison of Conventional and Ultrasonic-Assisted Adsorption Processes by Using H3PO4 Activated Cypress Tree Cone for Methylene Blue Removal (vol 44, pg 269, 2022)
(Pleiades Publishing Inc, 2022)[Abstract Not Available] -
Comparison of Fenton process and adsorption method for treatment of industrial container and drum cleaning industry wastewater
(Taylor & Francis Ltd, 2018)The present study aims to explore the characterization of industrial container and drum cleaning (ICDC) industry wastewater and treatment alternatives of this wastewater using Fenton and adsorption processes. Wastewater ... -
Comparison of kinetics and costs of Fenton and photo-Fenton processes used for the treatment of a textile industry wastewater
(Academic Press Ltd- Elsevier Science Ltd, 2022)In this study, the treatment of textile industrial wastewater by Fenton and Photo-Fenton oxidation processes was investigated. For this purpose, the pH, Fe2+ and H2O2 concentrations with the best organic matter and color ... -
COMPARISON OF OZONATION, ADSORPTION AND AIR STRIPPING PROCESS FOR AMMONIA NITROGEN REMOVAL FROM REAL TEXTILE WASTEWATER
(Yildiz Technical Univ, 2020)In this study, the NH4-N, organic nitrogen, color and COD removal were investigated in raw wastewaters (WW1, WW2, WW3) of a textile industry that performs cotton and polyester dyeing and printing processes. For this purpose, ... -
The Comparison of Physical Characteristics of Anatolian Native Goat Down Fibers With Cashmere
(Ege Univ, 2019)Very fine and soft down fibers of native goats can have a potential as a valuable raw-material source for high-quality products. Therefore, down fibers were collected from native goats raised in different regions of Turkey, ... -
Comparison of the effects of various pre-settings on the colour yield of polyester dyed with disperse dyes
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2011)Comparison of the effects of various pre-settings on the colour yield of polyester dyed with disperse dyes During textile production with synthetic fibres such as polyesters, stress is generated within fibre structure such ... -
Comparison of the Physical and Handle Properties of the Fabrics Produced from Wool and Mohair
(Taylor & Francis Inc, 2021)In this study, the differences of the fabric properties produced from wool and mohair fibers were investigated. By using 100% wool yarns and 100% mohair yarns separately in warp direction and the same yarns in the weft ... -
Comparison of TiO2 and ZnO catalysts for heterogenous photocatalytic removal of vancomycin B
(Techno-Press, 2018)Continuous input into the aquatic ecosystem and persistent structures have created concern of antibiotics, primarily due to the potential for the development of antimicrobial resistance. Degradation kinetics and mineralization ... -
Comparison of Wool Fabric Dyeing with Natural and Synthetic Dyes in View of Ecology and Treatability
(Amer Assoc Textile Chemists Colorists-Aatcc, 2020)The aim of this study was to compare the fastness properties and wastewater quality in obtaining the same color on 100% woven wool fabric with natural (madder) and synthetic (1:1 metal complex) dyes. The same color, with ... -
A composite sandwich plate with a novel core design
(Elsevier Sci Ltd, 2018)In this study, a new core design is introduced for sandwich composite structures. Its strength and failure behavior are investigated via three-point bending tests. E-glass-fiber-reinforced epoxy resin is selected as the ... -
A comprehensive approach to winery wastewater treatment: a review of the state-of the-art
(Desalination Publ, 2016)Winery industries generate large volumes of high-strength wastewater whose characteristics greatly vary depending on either seasons, production technologies or scale of the wineries. Winery wastewater (WW) is persistent ... -
A Compressive Sensing Application on Microwave Diffraction Tomography for the Microwave Imaging of a Stroke Affected Human Brain
(IEEE, 2018)In this paper, we present a diffraction tomography based compressive sensing technique for the monitoring of hemorrhagic brain strokes. The method uses the measurements of the scattered field data on two different time ...