Başlık için Çorlu Meslek Yüksekokulu Koleksiyonu listeleme
Toplam kayıt 90, listelenen: 41-60
-
Evaluation of the impact of UV radiation on rheological and textural properties of food
(Wiley, 2022)Demand for healthy, safe, and high-quality foods and disadvantages of thermal processing methods such as quality losses supported the improvement of the novel, affordable, and quick nonthermal food preservation techniques ... -
Evaluation of the phenolic content and antioxidant activity of sunflower seeds under deficit irrigation conditions
(INNOVHUB - Stazioni Sperimentali per l'Industria S.r.l - Area Oli e Grassi, 2022)Abiotic stress like deficient irrigation might affect the synthesis of secondary metabolites in plants, which has several pharmacological effects. In this study, the effect of water deficit was determined on sunflower ... -
Experimental examination and theoretical modeling of drying behavior in the ram machine
(Taylor & Francis Inc, 2020)In this study, drying behavior of a ram machine, basically used for drying of textile products with hot air, was experimentally examined and the drying behavior was theoretically modeled by the first order kinetic model ... -
Fabrication, characterization, and in vivo biocompatibility evaluation of titanium-niobium implants
(SAGE Publications Ltd, 2021)In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was ... -
FATTY ACID COMPOSITION OF Silybum marianum L. SEEDS AND ANTIMICROBIAL ACTIVITY OF SEED OIL AND SILYMARIN EXTRACT
(2021)In this study, it was aimed to determine fatty acid profile and the antimicrobial activity of the seed oilobtained from the seed of Silybum marianum L. and silymarin which was extracted through methanolextraction of Silybum ... -
Gelatin production from trim wastes of buffalo leather by different methods and determination rheological properties of Buffalo Gelatin
(Namik Kemal University - Agricultural Faculty, 2018)Industrial wastes are one of the most important problems in leather industry in the world and in our country. By evaluating these wastes, it is very important to solve the environmental problems as well as to contribute ... -
Inactivation of E. coli and L. innocua in milk by a thin film UV-C reactor modified with flow guiding elements (FGE)
(Elsevier B.V., 2021)In this study the suitability of a thin-film reactor (TFR) equipped with special flow guiding elements (FGE) was examined to analyse its capability to inactivate microorganisms in milk. Experiments were carried out with ... -
The influence of openness to experience and nostalgia proneness on brand loyalty
(Emerald Group Publishing Ltd, 2018)Purpose The purpose of this paper is to examine the joint effect of two composite characteristics -openness to experience (OE) and nostalgia proneness (NP) - on product involvement (PI) and whether brand loyalty (BL) is a ... -
Interned based experimental tools for voltage source inverters
(2013)This study implements a virtual laboratory for half bridge, full bridge and three phase voltage source inverters (VSI). Users can connected to the system from any computer having internet connection and perform any experiment ... -
INVESTIGATION OF EFFICIENCY OF R717 REFRIGERANT SINGLE STAGE COOLING SYSTEM AND R717/R744 REFRIGERANT CASCADE COOLING SYSTEM
(2021)This study is an adaptation of ammonia cascade cooling systems using carbon dioxide on ice cream production machinesand includes thermodynamic analysis of R717/R744 cascade refrigeration system with R717 refrigerant ... -
Investigation of Energy Saving Potential in Buildings Using Novel Developed Lightweight Concrete
(Springer/Plenum Publishers, 2020)In this study, three different composite materials were produced from mixtures of natural and waste materials in different proportions. The produced composites were used to determine the insulation thickness of exterior ... -
Investigation of structural and optical properties of pure ZnO and co-doped ZnO:Al:Mnx (x=1%, 2%, 3%, 5% at.) semiconductor thin films and electrical properties of produced diodes
(Gazi Universitesi, 2023)In this work, undoped and co-doped ZnO:Al:Mn semiconductor thin films and p-type Si diodes were produced via sol-gel technique method. The morphological and optical properties of the produced thin films were investigated ... -
An Investigation on Fatty Acid Compositions of Three-Generation Biodiesel Fuels
(2022)Biodiesel’s fuel properties affecting engine performance, combustion and emission characteristics significantly depend on the feedstock from which it is produced. The most important parameter which influences the feedstock ... -
İmplantasyon Uygulamaları İçin Toz Metalurjisi ile Üretilen Ti-16Nb-4Sn Alaşımının Mikroyapı ve Biyouyumluluk Özelliklerinin İncelenmesi
(2022)Bu çalışmada, Ti-16Nb-4Sn alaşımları az gözenekli ve çok gözenekli olarak geleneksel toz metalürjisi yöntemi ile üretildi. Sinterlenen numunelerin faz analizleri ve mikroyapılarında meydana gelen değişimler; XRD, optik ... -
İş sağlığı ve güvenliği açısından işverenlerin risk değerlendirme yükümlülüğü
(2014)6331 Sayılı İş Sağlığı ve Güvenliği Kanunu 30 Haziran 2012 Tarihinde Resmi Gazetede yayınlanarak yürürlüğe girmiştir. 2003 yılında yürürlüğe giren 4857 sayılı İş Yasasına göre daha ayrıntılı düzenlemeler içeren yeni yasa, ... -
Kişilik Özelliklerinin Kompülsif Satın Alma Eğilimi Üzerindeki Etkisi
(2018)Son yıllarda küresel tüketimin yaygınlaşmasına paralel olarak rasyonel olmayan tüketici davranışlarında artış gözlenmektedir. Bu davranışlardan biri olan ve alışveriş bağımlılığı olarak bilinen kompülsif satın alma, kısaca, ... -
Leather surface refinement with application of the TiO2-SiO2-GLYMO nanocomposite and lacquer coating
(Society of Leather Technologists and Chemists, 2018)In the present study the effect of TiO2-SiO2-GLYMO nanocomposite on surface properties of leather was investigated. The TiO2-SiO2-GLYMO composite was prepared through the sol-gel route from tetraethoxysilane (TEOS) and ... -
Microstructure characterization and biocompatibility behaviour of TiNbZr alloy fabricated by powder metallurgy
(Institute of Physics Publishing, 2019)The purpose of this study is to produce Ti-10Nb-10Zr orthopaedic implant material by adding non-toxic niobium (Nb) and zirconium (Zr) elemental powders into titanium (Ti) powder. In addition, to compare the microstructure, ... -
Modeling of CO2 emissions via optimum insulation thickness of residential buildings
(Springer, 2021)The present study aims to determine and model CO2 emissions based on the energy savings through the thermal insulation applied to the external walls of the buildings for eighty-one different zones using four diverse thermal ... -
Moderate temperature and UV-C light processing of Uruset apple juice: Optimization of bioactive components and evaluation of the impact on volatile profile, HMF and color
(John Wiley and Sons Inc, 2021)In this study, the aim was primarily to optimize the process conditions for the enrichment of bioactive components in Uruset apple juice with UV-C light and moderate heat treatment. UV-C light was applied to Uruset apple ...