Ara
Toplam kayıt 3815, listelenen: 771-780
Combined Use of Graphical and Statistical Approaches for Analyzing Historical Precipitation Changes in the Black Sea Region of Turkey
(Mdpi, 2020)
Many statistical methods have been developed and used over time to analyze historical changes in hydrological time series, given the socioeconomic consequences of the changes in the water cycle components. The classical ...
Assessing wind energy potential of Turkey via vectoral map of prevailing wind and mean wind of Turkey
(Springer Wien, 2020)
In this study, the most detailed prevailing wind and average wind velocity maps of Turkey on a topographical layer were prepared in terms of the wind energy potential. Thus, the areas with high wind potential have also ...
Application of Timoshenko Beam-Column Theory in Data Correction for Steel Beam-Column Testing
(Asce-Amer Soc Civil Engineers, 2020)
A recent cyclic test program evaluated the performance of steel wide-flange columns under axial loads and lateral drifts; the specimens had either fixed-fixed or fixed-rotating boundary conditions. For both cases, the ...
Vibration Analysis of Inclusion Reinforced Composite Square Plates under Various Boundary Conditions
(Sage Publications Ltd, 2009)
The vibration behavior of E-glass epoxy cross-ply laminated plates containing unidirectionally aligned inclusions was studied under different boundary conditions by using first-order shear deformation theory (FSDT). The ...
Drying Behavior of Cultured Mushrooms
(Wiley, 2010)
In this study, the drying behavior of cultured mushrooms with an initial moisture content of 93% (drying basis [d.b.]) was investigated experimentally for different slice thicknesses and drying air temperatures, and the ...
Single Layer Drying Behavior of Apple Slices in a Microwave Dryer
(Trans Tech Publications Ltd, 2011)
In this study, the drying behaviour of single layer apple slices of 5mm thickness in a microwave dryer was investigated experimentally for four different microwave power levels (90 W, 180 W, 360 W and 600 W) and suitability ...
Simulation of Drying Behavior of Cotton Bobbins by a Simultaneous Heat and Mass Transfer Model
(Trans Tech Publications Ltd, 2011)
In this study, the drying process of cotton bobbins for different drying air temperatures has been simulated by a simultaneous heat and mass transfer model. In the model, the mass transfer is assumed to be controlled by ...
Drying Behavior of Polyester Based Yarn Bobbins in a Hot-Air Bobbin Dryer
(Trans Tech Publications Ltd, 2011)
Drying behavior of polyester based yarn bobbins (67% polyester, 33% viscose) was simulated for different drying air temperatures by a simultaneous heat and mass transfer model. In the model, it was assumed that mass transfer ...
A Review on the Mechanical Modeling of Composite Manufacturing Processes
(Springer, 2017)
The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...