Bölüm "Fakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 89, listelenen: 41-60
-
Experimental investigation of thermal comfort performance of a radiant wall and ceiling panel system
(Yildiz Technical University, 2022)The number of radiant heating-cooling systems in building applications is increasing it is because of low energy consumption, low operating temperature and high values they provide in terms of working compatibility with ... -
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
(Aalborg Univ Press, 2015)The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ... -
Fatigue Life Enhancement of Three Point Hitch System Brackets in the Garden Series Tractors
(Ankara Univ, Fac Agr, 2017)The main objective of this research was to enhance the fatigue performance of the brackets found in the three point hitch system used in garden series tractors. This was achieved by using experimental tests and finite ... -
Fault detection of washing machine with discrete wavelet methods
(Kaunas Univ Technol, 2014)In the last decade, a new mathematical method has allowed scientists and engineers to view the details of time varying and transient phenomena that are not possible through conventional tools. This invention, called wavelet ... -
Finite element modelling of crackable connecting rods at fracture splitting process
(Kaunas Univ Technol, 2015)In this study crack propagation analysis of impulsively loaded connecting rods with different microstuctures namely perlitic, bainitic, tempered martensitic were studied numerically for evaluation of fracture parameters. ... -
Flow optimization in a microchannel with vortex generators using genetic algorithm
(Elsevier Ltd, 2022)In this study, delta winglet-type vortex generators, widely used in conventional macro channels and proven to be effective, are used in microchannels to increase their heat transfer capacities. The effects of vortex ... -
Forced vibration analysis of functionally graded beams using nonlocal elasticity
(Elsevier Sci Ltd, 2013)A forced vibration analysis of functionally graded (FG) nanobeams is considered based on the nonlocal elasticity theory. The solution is obtained by using Navier method for various shear deformation theories. The material ... -
Free vibration analysis of short fiber reinforced laminated plates with first shear deformation theory
(2012)Vibration analysis of simply supported square laminated plates containing randomly and unidirectionally aligned short fibers was performed. The effective elastic modulus of composite was expressed by using the Mori-Tanaka ... -
From industrial waste to carbon-containing nanocomposites to obtain multifunctional properties for industrial applications
(Elsevier B.V., 2022)Helianthus annuus (sunflower) and Brassica napus (canola) are two important crops for vegetable oil industry, but their residues after harvesting cause agricultural waste. In this study, agricultural wastes of sunflower ... -
Improvement of metallurgical properties of A356 aluminium alloy by AlCrFeSrTiBSi master alloy
(Walter de Gruyter GmbH, 2023)A new AlCrFeSrTiBSi master alloy was manufactured by in situ synthesis in Al melt, and compared with AlBSr master alloy. Microstructures of A356 alloy modified with AlCrFeSrTiBSi master alloy were investigated, and the ... -
Investigation of drying kinetics of viscose yarn bobbins
(2011)This study is concerned with the investigation of the suitability of several empirical and semi-empirical drying models available in the literature to define drying behavior of viscose yarn bobbins. For this purpose, ... -
Investigation of Microwave Drying of a Firefighting Hose
(Gazi Univ, 2022)The hoses used for fire extinguishing must be dried and stored after use in order to be cleaned, maintained and long-lasting. For this purpose, microwave energy which is a fast drying technology, was applied at power values ... -
Investigation of the effect of drying air temperature on drying time by numerical method for textile bobbins
(Institute of Physics Publishing, 2019)Drying of the yarn bobbins in the textile sector is a very important stage among the textile finishing processes. Because this process takes a lot of time and causes a large amount of energy consumption. In this study, ... -
Investigation of the Performance of a Hybrid Dryer Designed for the Food Industry
(Mdpi, 2019)In this study, a microwave energy conveyor dryer with the support of solar energy was researched with respect to its usability in the food industry and its short drying time and low energy requirements. The hot air produced ... -
Joint performance of medium carbon steel-austenitic stainless steel double-sided TIG welds
(Walter de Gruyter GmbH, 2023)AISI 1040 and AISI 304 steel plates of 10 mm were joined without pretreatment by double-sided TIG arc welding (DSAW). Joints were manufactured by using welding currents of 420, 440, and 460 A. The microstructural variations ... -
A mathematical model for through-air drying process of yarn bobbins
(Taylor and Francis Ltd., 2021)In this study, a mathematical model has been developed to simulate the through-air drying process of yarn bobbins. For this purpose, experimental data was obtained in a prototype experimental set up by passing pressurized ... -
Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials
(Asme, 2018)Micro-computed tomography (CT) was used as a tool to investigate the deformation behavior of particulate-filled composite materials. Three different shapes of glass fillers (spherical, flake, and fiber) and filler mass ... -
Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements
(Springer Heidelberg, 2019)A method based on X-ray micro-CT was introduced to create realistic representative volume elements (RVE) for particulate-filled composite materials. The method is applicable to most composite systems, and can be utilized ... -
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ... -
MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, 2014)The plasma transferred arc (PTA) process was used for developing wear resistance of AISI 430 steel substrate. Appropriate quantities of FeCrC, FeW and FeTi powders were combined to create conditions that synthesized M7C3 ...