Kurum Yazarı "Çınar, Kenan" WoS İndeksli Yayınlar Koleksiyonu İçin Listeleme
-
3D finite element model for predicting manufacturing distortions of composite parts
Çınar, Kenan; Ersoy, Nuri (Sage Publications Ltd, 2016)A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ... -
A composite sandwich plate with a novel core design
Uzal, Anıl; Sönmez, Fazıl O.; Öz, Fatih E.; Çınar, Kenan; Ersoy, Nuri (Elsevier Sci Ltd, 2018)In this study, a new core design is introduced for sandwich composite structures. Its strength and failure behavior are investigated via three-point bending tests. E-glass-fiber-reinforced epoxy resin is selected as the ... -
Effect of particle shape on the wear and friction behavior of particle-reinforced epoxy coatings
Çınar, Kenan; Eruslu, Sait Özmen; Dalmış, İbrahim Savaş; Güven, İbrahim (Springer, 2019)Epoxy coatings are increasingly becoming popular choices as barriers against acids and alkali for protection of concrete and metal products. In applications, metal containers are often coated with epoxy-based coatings to ... -
Effect of residual stress on the bending response of L-shaped composite laminates
Çınar, Kenan; Güven, İbrahim; Ersoy, Nuri (Elsevier Sci Ltd, 2020)[No Abstract Available] -
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
Çınar, Kenan (Sage Publications Ltd, 2020)In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ... -
An Experimental and Numerical Investigation of Particle Morphology Effect on the Elasto-plastic Behavior of Particle-filled Composites
Çınar, Kenan; Parasız, Sunal Ahmet; Akbulut, Mustafa; Eruslu, S. Özmen (Korean Fiber Soc, 2022)In this study, the influence of particle shapes on the elastoplastic response of composite materials is investigated both experimentally and computationally. Flake, spherical, irregular, and rod type glass particles are ... -
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
Eksi, Olcay; Karabeyoğlu, Sencer Süreyya; Çınar, Kenan (Carl Hanser Verlag, 2019)Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ... -
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
Çınar, Kenan; Öz, Fatih E.; Ersoy, Nuri (Aalborg Univ Press, 2015)The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ... -
Influences of out-of-plane fiber waviness on the curved beam strength of glass fiber composite laminates
Çınar, Kenan (Pamukkale Univ, 2020)In-plane and out-of-plane waviness are inevitable defects in parts that have curved sections made of continuous fiber-reinforced composites. These defects can be located in the micro, meso (ply level) and macroscale (part ... -
Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials
Çınar, Kenan; Güven, İbrahim (Asme, 2018)Micro-computed tomography (CT) was used as a tool to investigate the deformation behavior of particulate-filled composite materials. Three different shapes of glass fillers (spherical, flake, and fiber) and filler mass ... -
Micromechanical modeling of particulate-filled composites using micro-CT to create representative volume elements
Güven, İbrahim; Çınar, Kenan (Springer Heidelberg, 2019)A method based on X-ray micro-CT was introduced to create realistic representative volume elements (RVE) for particulate-filled composite materials. The method is applicable to most composite systems, and can be utilized ... -
A Review on the Mechanical Modeling of Composite Manufacturing Processes
Baran, İsmet; Çınar, Kenan; Ersoy, Nuri; Akkerman, Remko; Hattel, Jesper H. (Springer, 2017)The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ... -
Thermoforming behavior of 3D-printed PLA sheets
Eksi, Olcay; Karabeyoğlu, Sencer Süreyya; Çınar, Kenan; Muhurcu, Aydin (Carl Hanser Verlag, 2020)Fused deposition modeling is one of the most well-known additive manufacturing methods. It might be considered the easiest way to produce particle reinforced composites or unreinforced sheets which are biodegradable and ...