Ara
Toplam kayıt 17, listelenen: 1-10
Simulation and thermodynamic analysis of a hot-air textile drying process
(Taylor & Francis Ltd, 2015)
This paper is concerned with the simulation of drying behavior of wool yarn bobbins and also determination of the optimum operating conditions by using thermodynamic analysis. Firstly, experimental drying behavior of wool ...
Bir Kürk-Süet Üretim Fabrikasının Spesifik Enerji Tüketim Yöntemi İle Enerji Tasarruf Potansiyelinin Araştırılması
(2018)
Bu çalışmada bir endüstriyel kürk–süet üretim fabrikasının enerji tasarruf çalışmalarına katkı sağlamak ayrıca enerji yönetimiorganizasyonu tarafından ön enerji tasarrufu etüdü hazırlanabilmesi için, 2016 yılı üretim ve ...
Ram makinesinde kurutma prosesinin enerji verimliliği analizi
(2019)
Tekstil sektöründe ram makineleri, kumaşların makine içerisinde enine bir şekilde paletler tarafındantutturulduğu, bir çift yürüyen zincirle kumaşın hareketinin sağlandığı ve bu esnada kumaşa sıcak havanıngönderildiği ...
Analysis of the Heat Pump Performance of Different Refrigerants in a Building with Determined Heating Load According to Ts 825
(2020)
In this study, the performance of a geothermal heat pump used in heating mode for a house whose heating energy need is determined according to the Turkish thermal insulation standard TS 825, with different refrigerants has ...
Experimental examination and theoretical modeling of drying behavior in the ram machine
(Taylor & Francis Inc, 2020)
In this study, drying behavior of a ram machine, basically used for drying of textile products with hot air, was experimentally examined and the drying behavior was theoretically modeled by the first order kinetic model ...
Determination and Modeling of Optimum Insulation Thickness for Thermal Insulation of Buildings in All City Centers of Turkey
(Springer/Plenum Publishers, 2021)
In this study, research has been carried out in which the optimum insulation thickness for the thermal insulation of buildings in all city centers of Turkey is determined according to life cycle cost analysis. Besides, the ...
Modeling of CO2 emissions via optimum insulation thickness of residential buildings
(Springer, 2021)
The present study aims to determine and model CO2 emissions based on the energy savings through the thermal insulation applied to the external walls of the buildings for eighty-one different zones using four diverse thermal ...
Determination of Drying Behaviour in Industrial Type Convectional Dryer and Mathematical Modelling
(Vinca Inst Nuclear Sci, 2020)
In this study, the performance of a stenter (ram machine) that enables the drying of textile products with hot air is theoretically modelled with a diffusion model derived from Fick's second law. The experimental study was ...
Thin-Layer Drying Modeling in the Hot Oil-Heated Stenter
(Springer/Plenum Publishers, 2020)
Although the drying processes have an important place in the textile industry in terms of drying or various textile finishing applications, they are considered as an expensive process in terms of energy and time consumed. ...
Investigation of Energy Saving Potential in Buildings Using Novel Developed Lightweight Concrete
(Springer/Plenum Publishers, 2020)
In this study, three different composite materials were produced from mixtures of natural and waste materials in different proportions. The produced composites were used to determine the insulation thickness of exterior ...