Güncel Gönderiler: Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed
Toplam kayıt 7740, listelenen: 1521-1540
-
Structural and optical properties of pure ZnO and Al/Cu co-doped ZnO semiconductor thin films and electrical characterization of photodiodes
(Walter de Gruyter GmbH, 2021)Nano-structured semiconductor thin films and p-type Si photodiodes were fabricated with the sol-gel spin coating technique using pure ZnO and co-doped ZnO:Alx:Cuy with x = 1 at.-%, y = 1, 2, 3, 5 at.-%. The structural and ... -
Microstructure characterization and biocompatibility behaviour of TiNbZr alloy fabricated by powder metallurgy
(Institute of Physics Publishing, 2019)The purpose of this study is to produce Ti-10Nb-10Zr orthopaedic implant material by adding non-toxic niobium (Nb) and zirconium (Zr) elemental powders into titanium (Ti) powder. In addition, to compare the microstructure, ... -
Determination of Tekirda (Turkey) wind energy potential and evaluation of selected wind turbines in terms of techno-economic and environmental aspects
(Aip Publishing, 2021)In this study, the wind energy potential of Tekirda was investigated obtaining the wind data from meteorology stations located in nine districts of the province and recorded hourly at 10 m altitude between the years of ... -
Fabrication, characterization, and in vivo biocompatibility evaluation of titanium-niobium implants
(SAGE Publications Ltd, 2021)In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was ... -
Determination and Modeling of Optimum Insulation Thickness for Thermal Insulation of Buildings in All City Centers of Turkey
(Springer/Plenum Publishers, 2021)In this study, research has been carried out in which the optimum insulation thickness for the thermal insulation of buildings in all city centers of Turkey is determined according to life cycle cost analysis. Besides, the ... -
Thin-Layer Drying Modeling in the Hot Oil-Heated Stenter
(Springer/Plenum Publishers, 2020)Although the drying processes have an important place in the textile industry in terms of drying or various textile finishing applications, they are considered as an expensive process in terms of energy and time consumed. ... -
Investigation of Energy Saving Potential in Buildings Using Novel Developed Lightweight Concrete
(Springer/Plenum Publishers, 2020)In this study, three different composite materials were produced from mixtures of natural and waste materials in different proportions. The produced composites were used to determine the insulation thickness of exterior ... -
Assessment of CO2Emissions Reduction Based on Different Insulation Materials in Residential Buildings: Example from Turkey
(IOP Publishing Ltd, 2021)In this study, the reduction of CO2 emissions caused by energy savings due to thermal insulation materials applied to the exterior of buildings was investigated. The study includes the evaluation of four different insulation ... -
Experimental examination and theoretical modeling of drying behavior in the ram machine
(Taylor & Francis Inc, 2020)In this study, drying behavior of a ram machine, basically used for drying of textile products with hot air, was experimentally examined and the drying behavior was theoretically modeled by the first order kinetic model ... -
Determination of Drying Behaviour in Industrial Type Convectional Dryer and Mathematical Modelling
(Vinca Inst Nuclear Sci, 2020)In this study, the performance of a stenter (ram machine) that enables the drying of textile products with hot air is theoretically modelled with a diffusion model derived from Fick's second law. The experimental study was ... -
A study on the phase transformation behaviour of Cu-20wt.Sn alloy produced using powder metallurgy method: Experimental and molecular dynamics modelling
(Elsevier B.V., 2020)In this study, Cu-20wt.Sn alloy was produced by powder metallurgy (PM) method by using high purity element powders. The phases in the microstructure of the produced alloy were determined by XRD study. The phase transformation ... -
Ram makinesinde kurutma prosesinin enerji verimliliği analizi
(2019)Tekstil sektöründe ram makineleri, kumaşların makine içerisinde enine bir şekilde paletler tarafındantutturulduğu, bir çift yürüyen zincirle kumaşın hareketinin sağlandığı ve bu esnada kumaşa sıcak havanıngönderildiği ... -
Analysis of the Heat Pump Performance of Different Refrigerants in a Building with Determined Heating Load According to Ts 825
(2020)In this study, the performance of a geothermal heat pump used in heating mode for a house whose heating energy need is determined according to the Turkish thermal insulation standard TS 825, with different refrigerants has ... -
Effect of treatments with UV-C light and electrolysed oxidizing water on decontamination and the quality of Gemlik black olives
(Springer, 2020)The efficacy of ultraviolet-C (UV-C), electrolysed oxidizing water (EOW) and sodium hypochlorite (NaOCl) solution was investigated as non-thermal processes for the surface decontamination of olives. Olives were irradiated ... -
Optimizing the extraction parameters of epigallocatechin gallate using conventional hot water and ultrasound assisted methods from green tea
(Inst Chemical Engineers, 2018)Epigallocatechin gallate (EGCG) is the main polyphenol present in green tea and is also known to possess various beneficial health effects. Extractions of EGCG, epigallocatechin (EGC), epicatechin gallate (ECG), and ... -
Rheological and some Physicochemical Properties of Selected Hydrocolloids and their Interactions with Guar Gum: Characterization using Principal Component Analysis and Viscous Synergism Index
(Taylor & Francis Inc, 2014)In this study, rheological and some physicochemical characteristics of some commercial hydrocolloids were determined. Principal component analysis and viscous synergism index (I-v) were used for the characterization of ... -
Effects on Edibility of Reused Frying Oils in the Catering Industry
(Taylor & Francis Inc, 2012)In this study, significant fatty acids, trans fatty acids, peroxide value, and free fatty acids of 25 samples collected from general restaurants, fast-food restaurants, and catering companies in Afyonkarahisar province and ... -
Effect of Uv-C Treatment on Microbial Population and Bioactive Compounds of Orange Juice Using Modified Reactor Based on Dean Vortex Flow
(2021)The aim of the present study was to investigate the effectiveness of UV-C treatment using a modified UVC reactor based on Dean vortex flow. Parameters taken into account were total aerobic bacteria count andyeast and mould ... -
Uluslararası Tojdac Dergisinin Bibliyometrik Analizi
(2018)Akademik yayınlar alanların gelişmesi ve bilime katkı sağlaması bakımından oldukça önemlidir. Akademik çalışmalarda, ilgili alanlara yönelik yeni yaklaşımlar ve değerlendirmeler elde edilmektedir. Özellikle akademik yükselme ...