Ara
Toplam kayıt 311, listelenen: 91-100
Energy and exergy analysis and thermo-economic optimization of the ground source heat pump integrated with radiant wall panel and fan-coil unit with floor heating or radiator
(Pergamon-Elsevier Science Ltd, 2020)
Current study is aimed at making the most appropriate design considering the dynamic energy, exergy and economic analysis of Ground Source Heat Pumps (GSHP). The energy required to heat and to cool a 200 m(2) office in ...
Effect of residual stress on the bending response of L-shaped composite laminates
(Elsevier Sci Ltd, 2020)
[No Abstract Available]
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
(Sage Publications Ltd, 2020)
In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...
Hydroforming analysis of exhaust pipe connectors
(Carl Hanser Verlag, 2020)
In this work, a hydroforming analysis of an exhaust pipe clamp adaptor made of galvalume steel was performed. Deformation and failure of galvalume exhaust pipe connectors and its coatings via the hydroforming process were ...
Thermoforming behavior of 3D-printed PLA sheets
(Carl Hanser Verlag, 2020)
Fused deposition modeling is one of the most well-known additive manufacturing methods. It might be considered the easiest way to produce particle reinforced composites or unreinforced sheets which are biodegradable and ...
Effect of carbides on the wear resistance of white cast iron alloyed with 12.7 wt.-% Cr and nickel
(Carl Hanser Verlag, 2020)
White cast iron with about 12.7 wt.-% chromium was alloyed with Ni, W and Mo for heat treatment applications. Heat treatments were performed at a range of 850-1050 degrees C for 1 h in order to distribute M7C3 carbides ...
Metallurgical characterization of mechanically alloyed MoNiAl-WC reinforced Fe matrix composite
(Carl Hanser Verlag, 2020)
MoNiAl-WC reinforced Fe matrix composites were obtained by mechanical alloying. The effect of various reinforcement ratios on microstructure change, elemental characterization and phase transformation were examined by using ...
Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons
(Carl Hanser Verlag, 2020)
The aim of this study was to investigate the influence of austempering on the mechanical properties of solution-strengthened ferritic cast ductile irons. The microstructural examinations of the samples were conducted using ...
Dyeing of Cotton Fabric with Natural Dyes without Mordant Usage Part I: Determining the Most Suitable Dye Plants for Dyeing and UV Protective Functionalization
(Korean Fiber Soc, 2020)
Natural dyes are gaining importance in textile dyeing applications in recent years due to the fact many synthetic dyes are carcinogenic, mutagenic, and allergic. In this study, cotton knitted fabrics were dyed with extract ...
Out-of-plane auxetic nonwoven as a designer meta-biomaterial
(Elsevier, 2020)
Biomaterials are porous and three-dimensional (3D) templates, which are used as biological substitutes in tissue engineering. Targeting the optimal design of biomaterials requires a synergy between mechanical, porous, mass ...