Ara
Toplam kayıt 435, listelenen: 121-130
Metallurgical characterization of mechanically alloyed MoNiAl-WC reinforced Fe matrix composite
(Carl Hanser Verlag, 2020)
MoNiAl-WC reinforced Fe matrix composites were obtained by mechanical alloying. The effect of various reinforcement ratios on microstructure change, elemental characterization and phase transformation were examined by using ...
Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons
(Carl Hanser Verlag, 2020)
The aim of this study was to investigate the influence of austempering on the mechanical properties of solution-strengthened ferritic cast ductile irons. The microstructural examinations of the samples were conducted using ...
Finite element modeling of glass particle reinforced epoxy composites under uniaxial compression and sliding wear
(Walter De Gruyter Gmbh, 2021)
In this study, the failure mechanism of glass particle epoxy composites was investigated under compression and sliding wear. Random fiber distribution with minimum interfiber distance was modeled by representative volume ...
Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites
(Walter De Gruyter Gmbh, 2021)
Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ...
Comparison of the effects of various pre-settings on the colour yield of polyester dyed with disperse dyes
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2011)
Comparison of the effects of various pre-settings on the colour yield of polyester dyed with disperse dyes During textile production with synthetic fibres such as polyesters, stress is generated within fibre structure such ...
Effect of hardness caused by using salts in dye houses on the yield of reactive dyes coloring
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2011)
In this research, the effect of hardness, which arises from using salts in the dyeing process, on color yield was investigated. According to the experimental results, it was determined that even if soft water is used in ...
The use of dendrimers to obtain low temperature dyeability on mohair and Angora fibers
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2010)
Dendrimers are macromolecules with a regular and highly branched three-dimensional architecture. In this study, the aim was to improve the dyeability of mohair and Angora fibers via dendrimer application and to assess the ...
Solvent Assisted Low Temperature Dyeing. Part I: Results for Mohair (Angora Goat) Fibres
(Inst Chemical Fibres, 2011)
It is generally known that mohair tends to lose its luster when dyed for prolonged periods at the boil, and to preserve its luster it is generally necessary to use short dyeing cycles and low dyeing temperatures. Beyond ...
The effect of the usage of fiber protecting agent and dye class on the damage of Angora fibers occurred during dyeing process
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2011)
Angora fiber's properties are affected adversely when dyed for prolonged periods at the boiling temperature, and to preserve its luster, one of the alternatives is to use a fiber protecting agents in dyeing. This study has ...
A new line balancing algorithm for manufacturing cell transformation in apparel industry
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2013)
Apparel manufacturing is a traditional industry with global competition. Thus any apparel manufacturer realizes the importance of improved production systems tries the best to finish the assembly work soon to increase ...