Ara
Toplam kayıt 1728, listelenen: 421-430
Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying
(Consejo Superior Investigaciones Cientificas-Csic, 2020)
The Fe-based Ti+Ni3Al+Al2O3 powder mixture is mechanically alloyed in a Spex ball mill. Composites with Fe-based Ti+Ni3Al+Al2O3 addition were produced at 1000 degrees C sintering temperature for 1 h sintering time. The ...
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
(Sage Publications Ltd, 2020)
In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...
The Effect of the Heat Recovery on Fuel Consumption in the Stenter Machine
(Vinca Inst Nuclear Sci, 2021)
In this study, the convective drying process on the stenter machine used natural gas as fire' was examined in terms of energy saving. The fuel consumption in the drying process of wool fabric with and without heat recovery ...
Correction to: An experimental study on production of intelligent textile by using ionochromic materials
(2020)
[No Abstract Available]
PREPARATION OF SILVER CYCLOHEXANE DI CARBOXYLATE: ?-CYCLODEXTRIN INCLUSION COMPLEXES AND THEIR USE IN THE PRODUCTION OF POLY(VINYL ALCOHOL) NANOWEBS
(2020)
In this study, guest:host inclusion complexes of silver cyclohexane di carboxylate (Ag-CdC) with ?-cyclodextrin wereprepared by kneading and physical mixing techniques, and analyzed via Fourier transformed infrared ...
Cut Order Planning Optimisation in the Apparel Industry
(Inst Chemical Fibres, 2020)
Nowadays, apparel businesses have to cut down on their costs in order to ensure the continuity of their activities and to expand them. Fabric costs cover about 50-60% of production costs. In this study, for the minimisation ...
Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application
(Iop Publishing Ltd, 2020)
Bioelectrical impedance analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective ...
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)
Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ...
Dyeing of Cotton Fabric with Natural Dyes without Mordant Usage Part I: Determining the Most Suitable Dye Plants for Dyeing and UV Protective Functionalization
(Korean Fiber Soc, 2020)
Natural dyes are gaining importance in textile dyeing applications in recent years due to the fact many synthetic dyes are carcinogenic, mutagenic, and allergic. In this study, cotton knitted fabrics were dyed with extract ...
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)
In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ...