Ara
Toplam kayıt 570, listelenen: 181-190
Effect of carbides on the wear resistance of white cast iron alloyed with 12.7 wt.-% Cr and nickel
(Carl Hanser Verlag, 2020)
White cast iron with about 12.7 wt.-% chromium was alloyed with Ni, W and Mo for heat treatment applications. Heat treatments were performed at a range of 850-1050 degrees C for 1 h in order to distribute M7C3 carbides ...
Metallurgical characterization of mechanically alloyed MoNiAl-WC reinforced Fe matrix composite
(Carl Hanser Verlag, 2020)
MoNiAl-WC reinforced Fe matrix composites were obtained by mechanical alloying. The effect of various reinforcement ratios on microstructure change, elemental characterization and phase transformation were examined by using ...
Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons
(Carl Hanser Verlag, 2020)
The aim of this study was to investigate the influence of austempering on the mechanical properties of solution-strengthened ferritic cast ductile irons. The microstructural examinations of the samples were conducted using ...
Correction to: An experimental study on production of intelligent textile by using ionochromic materials
(2020)
[No Abstract Available]
PREPARATION OF SILVER CYCLOHEXANE DI CARBOXYLATE: ?-CYCLODEXTRIN INCLUSION COMPLEXES AND THEIR USE IN THE PRODUCTION OF POLY(VINYL ALCOHOL) NANOWEBS
(2020)
In this study, guest:host inclusion complexes of silver cyclohexane di carboxylate (Ag-CdC) with ?-cyclodextrin wereprepared by kneading and physical mixing techniques, and analyzed via Fourier transformed infrared ...
Cut Order Planning Optimisation in the Apparel Industry
(Inst Chemical Fibres, 2020)
Nowadays, apparel businesses have to cut down on their costs in order to ensure the continuity of their activities and to expand them. Fabric costs cover about 50-60% of production costs. In this study, for the minimisation ...
Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application
(Iop Publishing Ltd, 2020)
Bioelectrical impedance analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective ...
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)
Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ...
Dyeing of Cotton Fabric with Natural Dyes without Mordant Usage Part I: Determining the Most Suitable Dye Plants for Dyeing and UV Protective Functionalization
(Korean Fiber Soc, 2020)
Natural dyes are gaining importance in textile dyeing applications in recent years due to the fact many synthetic dyes are carcinogenic, mutagenic, and allergic. In this study, cotton knitted fabrics were dyed with extract ...
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)
In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ...