Ara
Toplam kayıt 60, listelenen: 31-40
Investigation of Properties of Mortars Containing Waste Stone Powder Instead of Sand under Freezing-Thawing Effect
(Institute of Physics Publishing, 2019)
Nowadays, sustainable production is vitally important in consideration of limited raw materials and an environmental welfare. Sustainable production encourages the use of several industrial wastes as raw materials in ...
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography
(DEStech Publications Inc., 2018)
Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave ...
Memristor-based timing circuit
(Institute of Electrical and Electronics Engineers Inc., 2017)
Memristor has been proposed as the fourth missing fundamental circuit element in 1971. This new circuit element has a charge controlled resistance, saturation mechanism and zero-crossing hysteresis loop which cannot be ...
Design of a real-sized composite drive shaft and critical points from beginning to end
(Applied Mechanics Laboratory, 2020)
In this study, the replacement of a metal drive shaft by a composite counterapart was investigated. The drive shaft considered here is a thin walled tube with an internal diameter of 60 mm and a length of 1200 mm. These ...
Sigmoid based PID controller implementation for rotor control
(Institute of Electrical and Electronics Engineers Inc., 2015)
This paper presents a sigmoid based variable coefficient PID (SBVC-PID) controller design for Twin Rotor MIMO System (TRMS). The proposed SBVC-PID controller dynamically changes controller coefficients according to a ...
Analysis of QoE key factors in IPTV systems: Channel switching
(2011)
The usage of Internet Protocol TV (IPTV) deployments in the consumer electronics market is growing very popularly in recent years. In IPTV systems, Quality of Experience (QoE) is very critical factor for end-user satisfaction. ...
Computer Aided Design of PID Control of Pulse DC Sintering System
(Institute of Electrical and Electronics Engineers Inc., 2019)
Pulse DC sintering (PDCS) systems, an effective way of producing sintered materials, are complex systems. They need to be modelled both electrically and thermally. Such a system can be controlled manually or automatically. ...
Research on the fire endurance of the silica sand membrane
(Institute of Physics Publishing, 2019)
In this study, the fire endurance, density, low-temperature deflection, penetration and ring-ball method tests of the membrane produced throughout the mixing of Bitumen, IPP (isotactic polypropylene), LDPE (Low-density ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...