Ara
Toplam kayıt 1495, listelenen: 301-310
Experimental investigation and pseudoelastic truss model for in-plane behavior of corrugated sandwich panels with polyurethane foam core
(Elsevier Science Inc, 2021)
Sandwich panels are commonly used in facades and the roofs of industrial buildings due to their well-known advantages. However, there is limited data about the in-plane behavior of the panels. Hence, this paper aimed to ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique
(Redakcia Kovove Materialy, 2018)
The study presents the behavior of FeCrC particulates reinforced and Ni-based composites produced by a mechanical alloying process in the presence of friction and wear. Ni, Al and M7C3 powders having 100 mu m size were ...
Effect of Microwave Drying on the Drying Characteristics, Color, Microstructure, and Thermal Properties of Trabzon Persimmon
(Mdpi, 2019)
In this study, changes in the drying kinetics, color change, and the energy consumption for microwave energy were investigated for Trabzon persimmon. In addition to that, the microstructure of the persimmon was also ...
Near-Wake Flow Structure of a Suspended Cylindrical Canopy Patch
(Mdpi, 2020)
Urban stormwater is an important environmental problem, especially for metropolitans worldwide. The most important issue behind this problem is the need to find green infrastructure solutions, which provide water treatment ...
MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, 2014)
The plasma transferred arc (PTA) process was used for developing wear resistance of AISI 430 steel substrate. Appropriate quantities of FeCrC, FeW and FeTi powders were combined to create conditions that synthesized M7C3 ...
Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds
(Assoc Mechanical Engineers Technicians Slovenia, 2014)
Thermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is an extremely efficient process that is suitable for ...
A composite sandwich plate with a novel core design
(Elsevier Sci Ltd, 2018)
In this study, a new core design is introduced for sandwich composite structures. Its strength and failure behavior are investigated via three-point bending tests. E-glass-fiber-reinforced epoxy resin is selected as the ...
Determination of some drying parameters of carrot dried using microwave method
(TUBITAK, 2020)
In this study, moisture content, drying time, the diffusion coefficient, activation energy, drying rate, drying efficiency and the energy consumed during the drying of carrot were determined by using the designed microwave ...
Investigation of Inland Pollution Using Total Carbon (Tc), Total Organic Carbon (Toc), Inorganic Carbon (Ic), Total Nitrogen (Tn) and Toc/Tn Ratios
(Corvinus Univ Budapest, 2019)
In this study, sediment samples were taken at three different points in Edremit Bay at different depths from the sea floor. In Edremit Bay, it was investigated whether the pollution was marine or terrestrial. According the ...