Ara
Toplam kayıt 2925, listelenen: 611-620
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)
This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...
Wear behavior of iron boride coating on AISI 4140
(Maik Nauka/Interperiodica/Springer, 2016)
A new paste technique was established for making boronising coatings. This method gave iron boride coatings a unique wear and tear property something that was tested as a microstructural feature. The coats were acquired ...
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
(Aalborg Univ Press, 2015)
The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ...
Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron
(Elsevier Science Sa, 2016)
Hypereutectic high chromium white cast iron alloys were produced with TiBAl (1-3 wt.%) inoculants. The heat treatments were applied to the samples as 1000 degrees C for 1 and 2 h. The microstructures of the samples were ...
Finite element modelling of crackable connecting rods at fracture splitting process
(Kaunas Univ Technol, 2015)
In this study crack propagation analysis of impulsively loaded connecting rods with different microstuctures namely perlitic, bainitic, tempered martensitic were studied numerically for evaluation of fracture parameters. ...
Experimental and numerical investigation of ground heat exchangers in the building foundation
(Pergamon-Elsevier Science Ltd, 2019)
The current study proposes a novel method with the experimental and numerical studies for the ground source heat pumps, which are known as environment-friendly and efficient heating & cooling systems to overcome their ...
Design of Semisphere Solar-Microwave Hybrid Dryer and Drying Performance of Zucchini
(Tarbiat Modares Univ, 2019)
In this work, performance of a newly designed hybrid dryer was investigated. Drying was done with the support of solar energy to microwave conveyor dryer. By using collector, which was designed with semisphere shape for ...
Effect of particle shape on the wear and friction behavior of particle-reinforced epoxy coatings
(Springer, 2019)
Epoxy coatings are increasingly becoming popular choices as barriers against acids and alkali for protection of concrete and metal products. In applications, metal containers are often coated with epoxy-based coatings to ...
Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique
(Redakcia Kovove Materialy, 2018)
The study presents the behavior of FeCrC particulates reinforced and Ni-based composites produced by a mechanical alloying process in the presence of friction and wear. Ni, Al and M7C3 powders having 100 mu m size were ...
Effect of Microwave Drying on the Drying Characteristics, Color, Microstructure, and Thermal Properties of Trabzon Persimmon
(Mdpi, 2019)
In this study, changes in the drying kinetics, color change, and the energy consumption for microwave energy were investigated for Trabzon persimmon. In addition to that, the microstructure of the persimmon was also ...