Güncel Gönderiler: Fakülteler
Toplam kayıt 6779, listelenen: 4701-4720
-
Effect of TiBAl inoculation on abrasive wear resistance of high Cr white cast iron
(Carl Hanser Verlag, 2019)High chromium white cast iron (HCrWCI) is generally used in applications requiring superior wear resistance. The alloys were inoculated with 1-3 wt.-% TiBAl to rearrange the crystallography of the carbides. The alloys were ... -
Effect of heat treatment on the wear behavior of GX200Cr13Ni6WMoMn
(Carl Hanser Verlag, 2019)The effect of cryogenic treatment on the microstructure, hardening behavior and wear resistance of subcritical treated GX200Cr13Ni6WMoMn was investigated. The specimens were improved for thermal shock resistance by having ... -
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
(Carl Hanser Verlag, 2019)Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ... -
Design of Semisphere Solar-Microwave Hybrid Dryer and Drying Performance of Zucchini
(Tarbiat Modares Univ, 2019)In this work, performance of a newly designed hybrid dryer was investigated. Drying was done with the support of solar energy to microwave conveyor dryer. By using collector, which was designed with semisphere shape for ... -
Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique
(Redakcia Kovove Materialy, 2018)The study presents the behavior of FeCrC particulates reinforced and Ni-based composites produced by a mechanical alloying process in the presence of friction and wear. Ni, Al and M7C3 powders having 100 mu m size were ... -
Micro-Computed Tomography as a Tool to Investigate the Deformation Behavior of Particulate-Filled Composite Materials
(Asme, 2018)Micro-computed tomography (CT) was used as a tool to investigate the deformation behavior of particulate-filled composite materials. Three different shapes of glass fillers (spherical, flake, and fiber) and filler mass ... -
Effect of different rotational speeds on mechanical and metallurgical properties of friction welded dissimilar steels
(Carl Hanser Verlag, 2018)In this study, effect of rotational speed on the characteristic microstructure and mechanic properties of the AISI 1030/AISI 420 stainless steel couple welded by friction welding method was experimentally investigated. The ... -
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography
(DEStech Publications Inc., 2018)Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave ... -
A novel approach for composite wear plate fabrication by using vertical centrifugal casting
(Kauno Technologijos Universitetas, 2018)A novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal ... -
A review of new technologies in valve systems of internal combustion engines and their effects
(Institute of Physics Publishing, 2019)Efficient use of energy is becoming increasingly crucial due to global warming and depleting fossil fuel sources. Automotive manufacturers aim for fuel economy, reduction of exhaust emissions, durability, volume and weight ... -
Design of air cooling unit with PCM
(Institute of Physics Publishing, 2019)In this paper a heat absorption unit has been designed to cool the entering hot air. For this aim, five slabs of PCM (Phase change material) have been used inside the cooling unit. The velocity and temperature values of ... -
A Review on the Mechanical Modeling of Composite Manufacturing Processes
(Springer, 2017)The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ... -
Wear behavior of iron boride coating on AISI 4140
(Maik Nauka/Interperiodica/Springer, 2016)A new paste technique was established for making boronising coatings. This method gave iron boride coatings a unique wear and tear property something that was tested as a microstructural feature. The coats were acquired ... -
Fatigue Life Enhancement of Three Point Hitch System Brackets in the Garden Series Tractors
(Ankara Univ, Fac Agr, 2017)The main objective of this research was to enhance the fatigue performance of the brackets found in the three point hitch system used in garden series tractors. This was achieved by using experimental tests and finite ... -
A composite sandwich plate with a novel core design
(Elsevier Sci Ltd, 2018)In this study, a new core design is introduced for sandwich composite structures. Its strength and failure behavior are investigated via three-point bending tests. E-glass-fiber-reinforced epoxy resin is selected as the ... -
Drying kinetics of cotton based yarn bobbins in a pressurized hot-air convective dryer
(Sage Publications Ltd, 2017)In this study, the drying kinetics of cotton bobbin drying process in a pressurized hot-air convective bobbin dryer was investigated, and a drying model was introduced for the simulation of drying. Tests were conducted for ... -
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ... -
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ... -
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ... -
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...