Güncel Gönderiler: Fakülteler
Toplam kayıt 6779, listelenen: 4541-4560
-
The effect of age of titanium dental implants on implant survival and marginal bone resorption: A 5-year retrospective follow-up study
(Allen Press Inc., 2020)It has been demonstrated that the osteoconductivity, hydrophilicity, and biological capacity of titanium decreases over time, and this phenomenon was described as the biological aging of titanium. The aim of this study was ... -
Kurmacanm Hilesi. Thomas Mann'ın Felix Krull Adlı Yapıtında Oto Kurmaca ve Rol Oyunları
(2016)Thomas Mann'm Felix Krull başlıklı yapıtı için yararlandığı en önemli metinlerarası belgelerden biri bilindiği üzere dolandırıcı Georges Manolescu'nun otobiyografisidir. Fakat bu otobiyogratiye Thomas Mann araştırmalarında ... -
Artık Co-Cr Alaşım Kullanımının Döküm Restorasyonlarının Korozyon Dirençleri Üzerine Etkisi
(2019)Amaç: Bu çalışmanın amacı Co-Cr alaşımlarının dökümünde,%50 artık alaşım (çupa) ilave edilmesi veya dökümdetamamen artık alaşımın kullanılması ile elde edilen örneklerinkorozyon direncini değerlendirmekti.Materyal-Metot: ... -
Development of a New Fabric Grading System with a Demerit Control Chart in the Apparel Industry
(Inst Chemical Fibres, 2021)Fabric defects are usually manually identified by quality control staff in the apparel industry. Control charts are an appropriate tool to achieve this goal. In this study, knitted fabric often used in an apparel factory ... -
The Effect of Linen and Linen Blends on the Comfort Properties of Bedding Fabrics
(Taylor & Francis Inc, 2021)In this study, the effect of linen and linen blends on the comfort properties of bedding fabrics was investigated. Therefore, 10 different fabric types were produced by using the same warp (100% cotton) and different weft ... -
Effect of Magnetite Nanoparticles on Cement Based Composite
(Serban Solacolu Foundation, 2021)There has been a rapid increase in interest in nanotechnology and nano particles. Nanotechnology has been increasingly brought into the study of cement-based materials in the recent years. Adding nanosized particles in ... -
Producing garment based multichromic smart sensors through dyeing cotton fabrics with chromic dyes
(Springer Science and Business Media B.V., 2022)The importance of technical, functional and smart textiles with high added value is gradually increasing. One class of smart textiles is chromic materials. Chromism is a reversible change in color caused by certain factors ... -
Production and analysis of electrospun pa 6,6 and pva nanofibrous surfaces for filtration
(Inst. Nat. Cercetare-Dezvoltare Text. Pielarie, 2021)Electrospun nanofibrous surfaces were produced by using two different polymers (PA 6,6 and PVA) at three different levels of polymer feeding rate (0.2, 0.6 and 1.0 ml/h, respectively) and three different levels of production ... -
Effect of different sintering conditions on microstructural characterisation of Co-Cr metal laser powder
(Inderscience Publishers, 2020)Co-Cr alloys have been used for many years in dentistry. In recent years, the fabrication of prosthetic restorations from Co-Cr alloys by metal laser sintering method has become widespread. This method is a combination of ... -
Evaluation of corrosion resistance of Co-Cr alloys fabricated with different metal laser sintering systems
(Korean Academy of Prosthodontic, 2020)PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND ... -
Reducing steaming times in the printing of nylon/elastane blend fabrics via chemical modification
(Lukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres, 2021)Nylon fibres are commonly used in blends with elastane. One of the problems encountered in the printing of nylon/elastane blend fabrics is the necessity of long steaming times for fixation, which causes an increase in ... -
Cut Order Planning Optimisation in the Apparel Industry
(Inst Chemical Fibres, 2020)Nowadays, apparel businesses have to cut down on their costs in order to ensure the continuity of their activities and to expand them. Fabric costs cover about 50-60% of production costs. In this study, for the minimisation ... -
Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application
(Iop Publishing Ltd, 2020)Bioelectrical impedance analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective ... -
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ... -
Dyeing of Cotton Fabric with Natural Dyes without Mordant Usage Part I: Determining the Most Suitable Dye Plants for Dyeing and UV Protective Functionalization
(Korean Fiber Soc, 2020)Natural dyes are gaining importance in textile dyeing applications in recent years due to the fact many synthetic dyes are carcinogenic, mutagenic, and allergic. In this study, cotton knitted fabrics were dyed with extract ... -
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ... -
Out-of-plane auxetic nonwoven as a designer meta-biomaterial
(Elsevier, 2020)Biomaterials are porous and three-dimensional (3D) templates, which are used as biological substitutes in tissue engineering. Targeting the optimal design of biomaterials requires a synergy between mechanical, porous, mass ... -
Obtaining Colored Patterns on Wool Fabric via Chitosan Application by Printing Prior to Dyeing
(Taylor & Francis Inc, 2020)Chitosan is the second most abundant polysaccharide in nature after cellulose and has been extensively used in cosmetics, food and environmental protection, and material sciences. It has also many different application ... -
Comparison of the Physical and Handle Properties of the Fabrics Produced from Wool and Mohair
(Taylor & Francis Inc, 2021)In this study, the differences of the fabric properties produced from wool and mohair fibers were investigated. By using 100% wool yarns and 100% mohair yarns separately in warp direction and the same yarns in the weft ... -
Comfort-Related Properties of Double-Layered Woven Car Seat Fabrics
(Sciendo, 2021)Seat upholstery fabrics for vehicles are crucial products as technical textiles in motor vehicles make up approximately 15% of the total manufactured technical textiles worldwide and more than 50% of the production belongs ...