Ara
Toplam kayıt 2734, listelenen: 2271-2280
Computer Aided Design of PID Control of Pulse DC Sintering System
(Institute of Electrical and Electronics Engineers Inc., 2019)
Pulse DC sintering (PDCS) systems, an effective way of producing sintered materials, are complex systems. They need to be modelled both electrically and thermally. Such a system can be controlled manually or automatically. ...
Job and personnel assessment in the apparel industry using fuzzy logic
(Lukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres, 2014)
In this study, a new approach to job and personnel assessment for the apparel industry is presented. The purpose of this new approach is to evaluate both qualitative and quantitative data at the same time. For this purpose, ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
The apocalypse myth in Louis de Bernières' novel Birds Without Wings: Rustem Bey and an individual apocalyptic experience in the kierkegaardian frame
(Ovidius University, 2015)
The aim of this study is to draw attention to the myth of apocalypse, which has grown in popularity in the literature at the turn of the millennium. Louis de Bernières in his novel Birds Without Wings also illustrates this ...
Determination of total selenium in Helianthus Annuus L. in Turkey during 2 years by Graphite Furnace Atomic Absorption Spectrometry (GFAAS)
(International Congress of Chemistry and Environment, 2014)
The purpose of this study was to estimate total selenium concentration in Helianthus Annuus L. collected from different regions in Turkey by graphite furnace atomic absorption spectrometry (GFAAS), prior to microwave ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...
Investigation of drying kinetics of viscose yarn bobbins
(2011)
This study is concerned with the investigation of the suitability of several empirical and semi-empirical drying models available in the literature to define drying behavior of viscose yarn bobbins. For this purpose, ...
Investigation of structural and electrical properties of flat a-Si/c-Si heterostructure fabricated by EBPVD technique
(American Institute of Physics Inc., 2013)
Flat amorphous silicon - crystal silicon (a-Si/c-Si) heterostructure were prepared by ultra-high vacuum electron beam evaporation technique on p-Si (111) and n-Si (100) single crystal substrates. Structural analyses were ...
Static Weyl type solutions of the Brans-Dicke theory
(American Institute of Physics Inc., 2016)
Static, axially symmetric Weyl type solutions and their properties are studied in the Brans-Dicke (BD) theory. The new solutions are obtained for the general Weyl solutions, two particle Chazy-Curzon solution and ...
Electrochemical impedance spectroscopic study of electrocoated polythiophene and poly(2-methyl thiophene) on carbon fiber microelectrode for microcapacitor
(2009)
In this study, N-thiophene (T), and N-2 methylthiophene (MT) homopolymers were electrocoated on carbon fiber microelectrodes (diameter ~7 ?m) by cyclic voltammetry within a potential range from 0.0 to 2.0 V with well - ...