Ara
Toplam kayıt 619, listelenen: 141-150
Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying
(Consejo Superior Investigaciones Cientificas-Csic, 2020)
The Fe-based Ti+Ni3Al+Al2O3 powder mixture is mechanically alloyed in a Spex ball mill. Composites with Fe-based Ti+Ni3Al+Al2O3 addition were produced at 1000 degrees C sintering temperature for 1 h sintering time. The ...
The Effect of the Heat Recovery on Fuel Consumption in the Stenter Machine
(Vinca Inst Nuclear Sci, 2021)
In this study, the convective drying process on the stenter machine used natural gas as fire' was examined in terms of energy saving. The fuel consumption in the drying process of wool fabric with and without heat recovery ...
Cut Order Planning Optimisation in the Apparel Industry
(Inst Chemical Fibres, 2020)
Nowadays, apparel businesses have to cut down on their costs in order to ensure the continuity of their activities and to expand them. Fabric costs cover about 50-60% of production costs. In this study, for the minimisation ...
Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application
(Iop Publishing Ltd, 2020)
Bioelectrical impedance analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective ...
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)
Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ...
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)
In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ...
Hydrogen Sulphide and Nitric Oxide Cooperate in Cardioprotection Against Ischemia/Reperfusion Injury in Isolated Rat Heart
(Int Inst Anticancer Research, 2020)
Background/Aim: This study was designed to provide further evidence for the interactions between hydrogen sulfide (H2S) and nitric oxide (NO) in ischemia/reperfiision (I/R) injury. Materials and Methods: Rat hearts were ...
The Investigation of Toxic Element Pollution and Radioactivity Analyses of Marine Sediments in the Gulf of Gemlik (Bursa, Turkey)
(Corvinus Univ Budapest, 2021)
In this study, the Toxic element pollution and radioactivity of marine sediments in the Gulf of Gemlik was determined. Enrichment factor (EF) and Pollution index (PI) analyses have been applied to determine toxic element ...
Nitrite and nitrate inhibition thresholds for a glutamate-fed bio-P sludge
(Pergamon-Elsevier Science Ltd, 2021)
Enhanced biological phosphorus removal (EBPR) is an efficient and sustainable technology to remove phosphorus from wastewater. A widely known cause of EBPR deterioration in wastewater treatment plants (WWTPs) is the presence ...
Effect of electric field on contact angle and droplet shape in XLPE dielectric materials
(Gazi Univ, Fac Engineering Architecture, 2021)
XLPE dielectric materials have an important place in electricity transmission and distribution. The aging of XLPE dielectric materials during the service period is inevitable. The surface properties of XLPE dielectric ...