Konu "Fabrication" için listeleme
Toplam kayıt 25, listelenen: 1-20
-
ANTIBACTERIAL ACTIVITY OF A NANOFILTRATION MEMBRANE FUNCTIONALIZED WITH STABLE TiO2 NANOPARTICLE SOLUTION PREPARED BY USING NEWLY MODIFIED HYDROTHERMAL METHOD
(Yildiz Technical Univ, 2017)Stable nanoparticle solution is the key parameter to obtain a uniform coating layer on the membrane surface without any aggregation for an efficient photocatalytic activity. In this study, a commercial titanium dioxide ... -
Characterization of one-step deposited Cu2ZnSnS4 thin films derived from a single crystalline powder
(Pergamon-Elsevier Science Ltd, 2019)In this paper, Cu-deficient and Zn-rich Cu2ZnSnS4 (CZTS) single crystals were successfully grown by Bridgman technique. Following the investigation of structural and photo-electrical properties of the grown CZTS crystal, ... -
CZTSSe thin films fabricated by single step deposition for superstrate solar cell applications
(Springer New York LLC, 2019)The focus of this study is the characterization of Cu2ZnSn(S,Se)4 (CZTSSe) thin films and fabrication of CZTSSe solar cell in superstrate configuration. In this work, superstrate-type configuration of glass/ITO/CdS/CZTSSe/Au ... -
A disposable and ultrasensitive ITO based biosensor modified by 6-phosphonohexanoic acid for electrochemical sensing of IL-1 beta in human serum and saliva
(Elsevier Science Bv, 2018)In this study, we constructed a new and sensitive ITO based electrochemical immunosensor for detection of interleukin 1 beta(IL-1 beta), a cancer biomarker found in serum and saliva. 6-phosphonohexanoic acid (PHA) was used ... -
Effect of mechanical alloying on FeCrC reinforced Ni alloys
(Carl Hanser Verlag, 2016)Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites ... -
Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron
(Elsevier Science Sa, 2016)Hypereutectic high chromium white cast iron alloys were produced with TiBAl (1-3 wt.%) inoculants. The heat treatments were applied to the samples as 1000 degrees C for 1 and 2 h. The microstructures of the samples were ... -
Effects of Sintering Temperature on Microstructural Properties of Ni1-xZnxFe2O4 Synthesized by Powder Metallurgy
(Kaunas Univ Tech, 2022)Powder metallurgy (PM) is a modern manufacturing method that allows high-tech materials, alloys and complex shaped parts to be manufactured with precision and almost without the need for finishing operations such as ... -
Electrochemical immunosensor for CDH22 biomarker based on benzaldehyde substituted poly(phosphazene) modified disposable ITO electrode: A new fabrication strategy for biosensors
(Elsevier Ltd, 2019)A novel label-free impedimetric immunosensor was fabricated for rapid, selective and sensitive detection and quantification of Cadherin-like protein 22 (CDH22), a cancer marker, in human serum by using easy and quickly ... -
Electronically controllable memcapacitor emulator employing VDCCs
(Elsevier Gmbh, 2021)Memcapacitors are become one of the research interest after the realization of memristors. Many researchers focused on the designing memcapacitor emulator because of some fabrication difficulties of this new element. In ... -
The electropolymerization of N,N-(propane-1,3-diyl)bis(2-aminobenzamide), characterization, and capacitor study
(Sage Publications Ltd, 2018)In this study, aniline-based monomer, N,N-(propane-1,3-diyl)bis(2-aminobenzamide), (PAB), was synthesized and characterized by proton nuclear magnetic resonance (1H-NMR), carbon-13 nuclear magnetic resonance (13C-NMR), and ... -
Fabrication, characterization, and in vivo biocompatibility evaluation of titanium-niobium implants
(SAGE Publications Ltd, 2021)In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was ... -
Glucose oxidase immobilization onto Au/poly[anthranilic acid-co-3-carboxy-N-(2-thenylidene)aniline]/PVAc electrospun nanofibers
(Springer, 2017)Au/poly[anthranilic acid-co-3-carboxy-N-(2-thenylidene)aniline/PVAc] [Au/P(ANA-co-CNTA)/PVAc] electrospun nanofibers were fabricated in different electrospinning media including acetone and dimethylformamide (DMF) for ... -
Improvement in electrical and photovoltaic properties of a-Si/c-Si heterojunction with slanted nano-columnar amorphous silicon thin films for photovoltaic applications
(Elsevier Science Bv, 2015)The flat a-Si and slanted nanocolumnar (S-nC) a-Si thin films were prepared on c-Si and corning glass substrates by e-beam physical vapor deposition (EB-PVD) technique. The structural properties of all the grown thin films ... -
Investigation of precursor sequence and post-annealing effects on the properties of Cu2SnZnSe4 thin films deposited by the elemental thermal evaporation
(Iop Publishing Ltd, 2017)Cu2ZnSnSe4 (CZTSe) thin films were deposited onto soda lime glass substrates by thermal evaporation using the pure elemental sources. The influence of the sequential deposition order of Zn and Sn precursor layers for ... -
LONG PATH TOWARDS TO SUCCESS IN ELECTROSPUN NANOFIBER YARN PRODUCTION SINCE 1930's: A CRITICAL REVIEW
(Autex, 2018)Direct conversion of nanofibers into a yarn formed by electrospinning has begun to draw attention recently while pioneering attempts in fact go back to 1930s. Once nanofiber yarns are spun successfully by electrospinning, ... -
A novel approach for composite wear plate fabrication by using vertical centrifugal casting
(Kauno Technologijos Universitetas, 2018)A novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal ... -
Preparation of rGO/Ag/PEDOT nanocomposites for supercapacitors
(Taylor & Francis Ltd, 2018)The hybrid nanocomposite based on poly(3,4-ethylenedioxythiophene)/Ag nanoparticle/reduced graphene oxide (rGO) was prepared by hydrazine hydrate. The nanocomposite materials have been characterized by scanning electron ... -
A sensitive and disposable indium tin oxide based electrochemical immunosensor for label-free detection of MAGE-1
(Elsevier Science Bv, 2017)MAGE-1 (MAGE, for melanoma antigen), was identified by virtue of its processing and cell surface expression as a tumor-specific peptide bound to major histocompatibility complexes which was reactive with autolytic T cells. ... -
Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique
(Redakcia Kovove Materialy, 2018)The study presents the behavior of FeCrC particulates reinforced and Ni-based composites produced by a mechanical alloying process in the presence of friction and wear. Ni, Al and M7C3 powders having 100 mu m size were ... -
Supercapacitor behaviors of polyaniline/CuO, polypyrrole/CuO and PEDOT/CuO nanocomposites
(Springer, 2015)Polyaniline (PANI)/copper oxide (CuO), poly(3,4-ethylenedioxythiophene) (PEDOT)/CuO and polypyrrole (PPy)/CuO have been synthesized electrochemically on glassy carbon electrode in sodium dodecyl sulfate in sulfuric acid ...