Ara
Toplam kayıt 118, listelenen: 11-20
Çelik liflerin geometrik şeklinin ve oranının beton özelliklerine etkisinin araştırılması
(2021)
Birçok araştırmada betonun teknik özelliklerini artırmak için farklı cins ve tiplerdeki liflerle çalışmalar yapılmıştır. Genellikle sonyıllarda betonun mekanik özeliklerinin öncelikli olan yerlerde çelik lif tercih ...
Basalt powder dependent properties of mortars subjected to high temperatures
(Croatian Soc Civil Engineers-Hsgi, 2019)
The effects of high temperatures of up to 800 degrees C on residual physical and mechanical properties of mortars are presented in this paper. Due to its resistance to high temperatures, basalt powder is used as a substitute ...
Erratum: Prediction of Concrete Compressive Strength and Slump by Machine Learning Methods (Advances in Civil Engineering (2019) 2019 (3069046) DOI: 10.1155/2019/3069046)
(Hindawi Limited, 2020)
In the article titled “Prediction of Concrete Compressive Strength and Slump by Machine Learning Methods” [1], there was an error in equation (1), which should be corrected as follows: (Formula Presented). Copyright © 2020 ...
Kırmızı çamurun çimento bazlı solidifikasyon/stabilizasyonu: Ağır metallerin sızma özellikleri
(2017)
Bu çalışmada, Konya Seydişehir Alüminyum Fabrikası'nda üretim sonucu oluşan kırmızı çamurun bertarafına ve geri kazanımına yönelik olarak araştırılmıştır. Bu amaç doğrultusunda öncelikle kırmızı çamurun fiziksel ve kimyasal ...
Thermophysical parameter estimation of a wool bobbin during convective drying process
(Taylor & Francis Ltd, 2010)
In this work, an inverse heat transfer problem was solved by using experimental temperature data to estimate the effective thermal properties as well as the effective heat transfer coefficients on the inner and outer ...
Cement-Based solidification/stabilization of red mud: Leaching properties of heavy metals
(Pamukkale Univ, 2017)
In this study, convenience of solidification / stabilization process for disposal and recycling of the red mud produced from Konya Seydisehir Aluminum Plant were examined. For this purpose physical and chemical properties ...
Recycling of Red Mud as a Building Material via a Stabilization/Solidification Method
(Asian Journal Of Chemistry, 2013)
This study examines stabilization/solidification techniques for red mud/cement systems that involve the production of construction products while minimizing contamination and recycling the red mud. In these techniques, the ...
Removal of Octyl Phenol Ethoxylate (OPE) Using Processed and Unprocessed Industrial Biological Waste Sludge
(Polska Akad Nauk, Polish Acad Sciences, Inst Environ Eng Pas, 2021)
This study investigated the Octyl Phenol Ethoxylate (OPE) removal potentials of raw and treated industrial treatment sludges (ITS) at different pH. Experiments were conducted in a set of 500 ml Erlenmeyer flasks, into which ...
Carbon Dioxide Emission in Thrace Region and Neighboring Countries as A Result of Aerobic Stabilization of Urban Treatment Sludges
(Yildiz Technical Univ, 2020)
The aim of this study was to investigate the effect of aerobic sludge stabilization on global carbon dioxide emission. Treatment sludge formed in the whole region has been determined based on the current population of ...
Novel Uses of Red Mud in Textile Wastewater Treatment, Dyeing, and Concrete Production
(Gh Asachi Technical Univ Iasi, 2015)
Optimum conditions for the reusability of red mud were explored testing both dried and HCl-activated red mud as a coagulant in the treatment of dyehouse wastewater. Treated dyehouse wastewater was further reused in five ...