Ara
Toplam kayıt 24, listelenen: 11-20
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
Drying kinetics of cotton based yarn bobbins in a pressurized hot-air convective dryer
(Sage Publications Ltd, 2017)
In this study, the drying kinetics of cotton bobbin drying process in a pressurized hot-air convective bobbin dryer was investigated, and a drying model was introduced for the simulation of drying. Tests were conducted for ...
Determination of some drying parameters of carrot dried using microwave method
(TUBITAK, 2020)
In this study, moisture content, drying time, the diffusion coefficient, activation energy, drying rate, drying efficiency and the energy consumed during the drying of carrot were determined by using the designed microwave ...
Sultani Çekirdeksiz Üzüm Çeşidinde Farklı Kurutma Yöntemlerinin Kurutma Kinetiği, Enerji Tüketimi ve Ürün Kalitesi Açısından İncelenmesi
(Namik Kemal University - Agricultural Faculty, 2020)
Sultana Seedless grape samples were dried using hot air and microwave methods in different temperature and power levels with untreated conditions and drying kinetics and energy consumption values based on method were ...
Using spray-dried microalgae as a natural coloring agent in chewing gum: effects on color, sensory, and textural properties
(Springer, 2018)
Chlorophyll-a and total carotenoid quantities of Isochrysis galbana and Nannochloropsis oculata biomass dried at different inlet temperatures (150-200 degrees C) using the spray dryer technique were investigated. The amounts ...
Experimental examination and theoretical modeling of drying behavior in the ram machine
(Taylor & Francis Inc, 2020)
In this study, drying behavior of a ram machine, basically used for drying of textile products with hot air, was experimentally examined and the drying behavior was theoretically modeled by the first order kinetic model ...
Thin-Layer Drying Modeling in the Hot Oil-Heated Stenter
(Springer/Plenum Publishers, 2020)
Although the drying processes have an important place in the textile industry in terms of drying or various textile finishing applications, they are considered as an expensive process in terms of energy and time consumed. ...
Investigation of the effect of drying air temperature on drying time by numerical method for textile bobbins
(Institute of Physics Publishing, 2019)
Drying of the yarn bobbins in the textile sector is a very important stage among the textile finishing processes. Because this process takes a lot of time and causes a large amount of energy consumption. In this study, ...
The relationship between curing regime and mechanical properties of controlled low-strength material
(Elsevier Ltd, 2022)
This paper outlines research conducted on controlled low strength material (CLSM) to examine the effects of curing condition and water-cementitious material (w:cm) ratio on its engineering properties, including compressive ...