Ara
Toplam kayıt 22, listelenen: 1-10
Kauçuk üretiminde istatistiksel deney tasarım yöntemiyle makine- süreç parametrelerinin optimizasyonu
(Namık Kemal Üniversitesi, 2019)
Bu tezin amacı, istatistiksel deneysel tasarım uygulanarak bir kauçuk üretim işletmesinde kalite hatalarını minimize eden makine süreç parametrelerinin optimizasyonunu sağlamaktır. Bu amaçla, üretim sürecinde kalite ...
Düzlem çelik kafes sistemlerin karınca kolonisi yöntemi ile optimum tasarımı
(Namık Kemal Üniversitesi, 2019)
Yapay zekaya dayalı optimizasyon teknikleri son 30 yıldır giderek artan bir hızla mühendislik problemlerinin çözümünde kullanılmaktadır. Bu algoritmaların çoğu doğadaki bir süreci taklit ederek geliştirilmiştir. Bu çalışmada ...
Dokuma kumaş üretiminde makine girişim modeli uygulaması
(Namık Kemal Üniversitesi, 2019)
Tam entegre çalışan bir tekstil fabrikasında kumaş üretimi iplik hazırlama, iplik üretimi, dokuma hazırlık, dokuma, terbiye ve kalite kontrol proseslerinden oluşur. Dokuma işlemi, tekstilde ipliğin yüzey haline geldiği bir ...
Cod and Color Removal From Wastewaters: Optimization of Fenton Process
(Pamukkale Univ, 2015)
In this study, COD and color removal from wastewaters by Fenton's oxidation were investigated. In the study the response variables of Y-1 and Y-2 were selected as COD removal rate (%) and color removal rate(%), and efficacy ...
Determination of the color removal efficiency of laccase enzyme depending on dye class and chromophore
(Iwa Publishing, 2019)
The aim of this article was to clarify which type of dye chromophores could be decolorized efficiently with the use of laccase enzyme. For this purpose, enzymatic degradation of different type of dye classes (4 reactive, ...
Minimum Spanning Tree Reflects the Alterations of the Default Mode Network During Alzheimer's Disease
(Springer, 2011)
This study analyzes the connectivity pattern of the default mode network (DMN) in patients with Alzheimer's disease (AD) in comparison with young and elderly controls using the minimum spanning tree (MST). This tree is a ...
Simulation and thermodynamic analysis of a hot-air textile drying process
(Taylor & Francis Ltd, 2015)
This paper is concerned with the simulation of drying behavior of wool yarn bobbins and also determination of the optimum operating conditions by using thermodynamic analysis. Firstly, experimental drying behavior of wool ...
Analysis and optimization of surface roughness in the ball burnishing process using response surface methodology and desirabilty function
(Elsevier Sci Ltd, 2011)
In the present study, an optimization strategy based on desirability function approach (DFA) together with response surface methodology (RSM) has been used to optimize ball burnishing process of 7178 aluminium alloy. A ...
Effect of the ozonation process on the dyeability of mohair fibres
(Wiley-Blackwell, 2011)
This work has focused on the use of ozonation in order to improve the dyeability of mohair fibres. The study was carried out using a known concentration of ozone and involved process parameters such as wet pick-up, level ...
The effect of core-sheath proportion on the characteristics of fabrics produced with hollow yarns: part II comfort and mechanical properties
(Taylor & Francis Ltd, 2018)
The study aims to investigate the effect of hollow yarn structure and the sheath-core proportion of hollow yarns on the permeability properties of the knitted fabrics. In order to accomplish this, core yarns in the yarn ...