Ara
Toplam kayıt 16, listelenen: 11-16
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
Drying kinetics of cotton based yarn bobbins in a pressurized hot-air convective dryer
(Sage Publications Ltd, 2017)
In this study, the drying kinetics of cotton bobbin drying process in a pressurized hot-air convective bobbin dryer was investigated, and a drying model was introduced for the simulation of drying. Tests were conducted for ...
Using spray-dried microalgae as a natural coloring agent in chewing gum: effects on color, sensory, and textural properties
(Springer, 2018)
Chlorophyll-a and total carotenoid quantities of Isochrysis galbana and Nannochloropsis oculata biomass dried at different inlet temperatures (150-200 degrees C) using the spray dryer technique were investigated. The amounts ...
Investigation of the effect of drying air temperature on drying time by numerical method for textile bobbins
(Institute of Physics Publishing, 2019)
Drying of the yarn bobbins in the textile sector is a very important stage among the textile finishing processes. Because this process takes a lot of time and causes a large amount of energy consumption. In this study, ...
Investigation of drying kinetics of viscose yarn bobbins
(2011)
This study is concerned with the investigation of the suitability of several empirical and semi-empirical drying models available in the literature to define drying behavior of viscose yarn bobbins. For this purpose, ...
Some applications to retain the quality of fruits and vegetables during drying and storage in Turkey
(Japan Society for Food Engineering, 2015)
Drying process is very important preservative method for foods and usually brings about some degradation of the final products. For this reason, some handlings such as pretreatments (physical, thermal, chemical etc.) are ...